Car Headlight Repair Fluid instructions

Apply a small amount of Headlight Restorer to a clean, dry cloth. Rub in a circular motion using firm pressure. Do one headlight at a time. Buff headlight with a clean, soft cloth or microfiber towel.

time required for a full curing of the coating. Drive away time is the point at which the vehicle can be driven without damaging the coating. Headlights should air dry at a minimum ambient temperature of 50° F for at least 60 minutes before allowing the customer to drive their vehicle.

Step 1: Start by cleaning the headlight with the Lens Clarifying Compound using a soft cloth to spread and remove the product. It will remove surface oxidation. Step 2: Finish with Lens Clarifying Compound and Headlight Sealing Wipe. Step 3: Let Headlight Sealing Wipes cure overnight.

Apply a thin strip of clear silicone to the crack using a sealant gun, before wiping away any excess with the paper towel. Leave this to set, preferably overnight (make sure your car is covered if rain is forecast). You can also use super glue like Loctite Epoxy to seal the crack.