The LP1020 is a 20-Watt, Class 2, Single Output, Switch-mode, LED Driver, C/C or C/V, in a rectangular case. Single output, constant current, or constant voltage design. Designed for outdoor or indoor applications.
Thanks to its portability features, the LP20 can be used either in the laboratory or at line for measuring CO2 and Oxygen of any beer and wine. For measuring the CO2 the equipment uses the ATR infrared. For measuring the dissolved oxygen, it uses an optical sensor.
LP20 Epoxy Primer is a two part epoxy primer for use as a primer under H1000, LP610 or LP620 (low VOC), or under 800K, 846, PS21nr, LS800 or LS56 (National Rule), as a primer-surfacer or as a wet-on-wet sealer under Limco topcoats.
LP20 offers excellent adhesion and corrosion protection when used over steel, aluminum, zinc coated or galvanized metals. LP20 can be applied over cured, cleaned and sanded paint finishes (except acrylic lacquers).