[PDF] Instructions for Miniflam AP Piezo Ignition Torch

How do you use a piezo ignitor on a gas fireplace?

Make sure your main gas supply is ON. From OFF position, turn gas control knob (reads OFF, ON & PILOT) counterclockwise to PILOT position. Push in knob (this releases the gas to the pilot area only). With control knob in, push the piezo ignitor in continuously until pilot ignites (every 3-5 seconds).

How do you ignite a piezo pilot?

Push in manual gas control knob all the way and hold in. Repeatedly push the piezo ignitor button until pilot is lit (or use a match to light pilot). Continue to hold the control knob in for about one (1) minute after the pilot is lit. Release knob and it will pop back up. Pilot should remain lit. If it goes out, repeat steps 3 through 7.

What is piezo ignition?

With piezo ignition on each of the 6 burners, the Matrix gives you extreme temperature control, meaning you can cook with both direct and indirect heat. Stainless steel burners and flame tamers improve heat distribution, reduce cold spots and flare-ups.

Can you start a propane torch with a piezo starter?

This electric start propane torch fits directly onto standard propane cylinders and is ideal for sweating and thawing pipes. The torch features a push-button electric piezo starter to keep hands away from the open flames. Propane tank not included.