[PDF] closet rod distance off wall

For a single rod application, plan 60-inches from the floor for placement. You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging. When spanning an opening of more than 48-inches, consider adding a center support to the closet rod for added stability.
View PDF Document


  • Allow about 24 inches of space behind the rod to hang garments and 4 inches above the rod before you add shelving, which allows for easy hanging of clothes.
View PDF Document




Closet Hardware Planning Guide

Mark the position on each wall for the pole sockets. Determine the width of the closet rod needed to span the brackets taking care to include the distance 



Carrier Systems

Z1201 and Z1202 EZCarry™ High Performance Water Closet Carrier System. OPTIONS and VARIATIONS X = distance closet is to be located from finished wall.



ShelfTrack® Installation Tips

Select the hardware that is right for your wall type: 2. Hang track location SuperSlide® with Closet Rod & Support always use 12 in. brackets.



2. Hang Track Location 3. Determine Length and Spacing of

more than 4” from the end of the shelf. 4. Securing Standards. Each Standard must be secured to the wall with Closet Rods can be cut using a pipe cutter.



Water Closet Supports Technical Data

S = Depth closet horn. 1/16" = Distance closet is to set away from finished wall. *D = 1/2" for felt gasket and 3/8" for neoprene gasket. NOTE: When the fixture 



Top Track Hardware and Hanging Standards

the wall while leveling and marking the rest of the holes. n Take out old shelving and closet rods. ... Remove the screw from the dark blue anchor.



PIPE HANGER SPACING & WEIGHT CHART

Wall. Weight of Pipe. Suggested. Recommended. Pipe Size. Pipe O.D.. Thickness. Weight of Pipe. Filled with Water. Maximum Span*. Hanger Rod Sizes.



Pipe hangers and supports catalog

Miscellaneous Charts – Piping Tubing



SHELFTRACK® INSTALLATION TIPS

Select the hardware that is right for your wall type: than 4 in. from the end of the shelf. ... SuperSlide® with Closet Rod & Support always use 12.



Closet Culture Install Sheets

Closet Pole Hook. • Mounting Screws. STEP 1: Measure 86" from the floor and make two marks on the wall with a pencil (Figure 1).