[PDF] cisco 3750 default enable password

Enter the IP address 10.0.0.1 in the web browser, and press Enter. The switch prompts you for the default switch password. Enter the default password, cisco.Autres questions
View PDF Document


  • What is the default password for cisco enable?

    Password: The default password is "cisco".

  • What is the default password for a cisco switch 3750?

    When prompted, enter the default password, cisco.
    The switch ignores text in the username field.

  • What is the default password for Catalyst 3750x?

    Start a browser session on the PC, and enter the IP address 10.0. 0.1.
    When prompted, enter the default password, cisco.

  • What is the default password for Catalyst 3750x?

    Password Recovery – Reset Procedure

    1On a 3750-X switch, Power off the entire stack or standalone switch.2Reconnect the power to the switch (standalone 3750-X or 3750-X) or stack master (3750-X stack only). 3Now initialize the flash file system, rename the startup configuration file (config.text) and boot the IOS:

View PDF Document




Catalyst 3750-X and 3560-X Switch Getting Started Guide

You must change the default password cisco. (Optional) Enter this information in the Ethernet Management Port Settings fields: • In the IP Address field



Catalyst 3750-X and 3560-X Switch Getting Started Guide

You must change the default password cisco. (Optional) Enter this information in the Ethernet Management Port Settings fields: • In the IP Address field



Controlling Switch Access with Passwords and Privilege Levels

Security Configuration Guide Cisco IOS XE Release 3SE (Catalyst 3850 Switches) This table shows the default password and privilege level configuration.



Configuring Global Credentials for Access Points

Cisco IOS access points are shipped from the factory with Cisco as the default enable password. This password allows users to log on to the nonprivileged 



Configuring Local Authentication

Router(config-if)# aaa authentication login default local DLP-J291 Set or Change a Static Enable Password Using Cisco IOS Commands on page 3.



Controlling Switch Access with Passwords and Privilege Levels

The default is level 15 (privileged EXEC level). The password is not encrypted in the configuration file. Enable password and privilege level.



Software Configuration Guide Cisco IOS Release 15.2(4)E (Catalyst

21 wrz 2015 Enabling Automated Cisco Networking Services (CNS) Configuration 20 ... Default Password and Privilege Level Configuration 202.



Catalyst 3750 Switch Software Configuration Guide 12.2(35)SE (full

Small to Medium-Sized Network Using Catalyst 3750 Switches 1-21. Large Network Using Catalyst Default Password and Privilege Level Configuration 9-2.



Configuring Local Authentication

Router(config-if)# aaa authentication login default local DLP-J291 Set or Change a Static Enable Password Using Cisco IOS Commands on page 3.



Catalyst 3750-X and Catalyst 3560-X Switch Software Configuration

Default Password and Privilege Level Configuration 10-3. Setting or Changing a Static Enable Password 10-3. Protecting Enable and Enable Secret Passwords