base mounting rail kit installation instructions</h6>

[PDF] INSTALLATION INSTRUCTIONS 58425 BASE RAIL MOUNTING KIT

Drill all holes with 3/16" drill and enlarge them with a 21/32" drill Always use sharp drill bits A 3/16" pilot hole will greatly speed drilling larger holes Install tube spacer between rail and bed, install 5/8” carriage bolts into holes

[PDF] 30095 BASE RAIL MOUNTING KIT

(3) Pass on copies of Manual to any other user or owner of Hitch DEALER/ INSTALLER: END USER: BASE RAIL KIT QTY 1 STRAIGHT FRAME BRACKET (

[PDF] INSTALLATION INSTRUCTIONS

BASE RAIL MOUNTING KIT (1) Read and follow this Manual every time you use Hitch The following instructions should be used to mount the 5th wheel

[PDF] BASE MOUNTING RAIL KIT INSTALLATION INSTRUCTIONS

BASE MOUNTING RAIL KIT INSTALLATION INSTRUCTIONS Warning: This hitch is designed to safely carry the loads specified Under no circumstances do we

[PDF] 10 BOLT UNIVERSAL BASE RAIL MOUNTING KIT Part &# 31622

Read and follow all instructions included in this manual Ask your Dealer / Use only the supplied bolts, nuts, and washers to install this kit All bolts and Insert 5th wheel uprights into slots in base rails for proper spacing of base rails(not

[PDF] INSTALLATION MANUAL - CURT

Each frame bracket must be secured with two bolts unless optional weld is used WARNING: The following instructions should be used to mount the base rails

[PDF] Custom 5th Wheel Hitch Mounting Rail Installation Instructions

Custom 5th Wheel Hitch Mounting Rail Installation Instructions Patriot 5th Wheel or Slider Base body of the bed and the steel components of this kit a

[PDF] (Universal Mounting Rail)\RVR3200 - B&W Trailer Hitches

Note: Some truck models require supplemental kits to install see page 9 for If your vehicle is not covered by these instructions, install each base rail so that it

[PDF] Installation Instructions Universal Mounting Kit ̴ - PullRite

23 jui 2014 · Arrange the Base Rails parallel to each other and attach the Base Sides using the four 1/2” Base Rail Pins and four Pin Clips 3 Remove the 3/4”

[PDF] base mounting rail kit installation instructions