302.2R-06 Guide for Concrete Slabs that Receive Moisture
ACI 360R and 302.1R provide recommendations for designing and building concrete slab-on-ground substrates that are suitable for receiving flooring materials.
Guide for Concrete Slabs that Receive Moisture-Sensitive Flooring
Reported by ACI Committee 302. ACI 302.2R-06. This guide contains materials design
Under Slab Vapor Retarders/Barriers: Perm Ratings and Puncture
However as. Page 5. stated above
Selection Design
and Inspection of Water Vapor
UNDER-SLAB VAPOR BARRIER PART 1 – GENERAL 1.1
ACI 302.2R-06 Guide for Concrete Slabs that Receive Moisture-Sensitive Flooring Materials. 2. ACI 302.1R-15 Guide to Concrete Floor and Slab Construction.
UNDER-SLAB VAPOR RETARDER PART 1 – GENERAL 1.1
ACI 302.2R-06 Guide for Concrete Slabs that Receive Moisture-Sensitive Flooring Materials. 2. ACI 302.1R-15 Guide to Concrete Floor and Slab Construction.
Standard installation of SLUs
Also reference ASTM F710. (“Preparing the Concrete Floor”) and ACI 302.2R-06 (“Guide for Concrete Slabs that Receive Moisture-Sensitive Flooring Materials
Subfloors radiant heat and existing flooring - Altro
-radiant-heat-and-existing-flooring.pdf
ASTM E1643-11 - REDLINE ASTM E1643-11
5.1 See ACI 302.2R–06 for material design
Ultrabond ECO WPA
2023年6月1日 ASTM F710 or ACI 302.2R-06. ▫ Exterior-grade plywood and other approved wood substrates (per the wood- ooring manufacturer's recommendations).
302.2R-06 Guide for Concrete Slabs that Receive Moisture
ACI 360R and 302.1R provide recommendations for designing and building concrete slab-on-ground substrates that are suitable for receiving flooring materials.
Guide for Concrete Slabs that Receive Moisture-Sensitive Flooring
ACI 302.2R-06 became effective August 15 2006. Copyright © 2006
302.2R-06 Guide for Concrete Slabs that Receive Moisture
ACI 302.2R-06 became effective August 15 2006. Copyright © 2006
Installation instructions for Altro DolceTM Tile and Altro DolceTM
Floor and Slab Construction and ACI 302.2R-06 Guide for. Concrete Slabs that Receive Moisture Sensitive Flooring Materials. Please consult www.concrete.org
Chapter 4
-radiant-heat-and-existing-flooring.pdf
Extending SLUs with aggregate
and ACI 302.2R-06 (“Guide for Concrete Slabs that Receive Moisture-Sensitive. Flooring Materials”). After surface preparation has been completed
Selection Design
and Inspection of Water Vapor
Under Slab Vapor Retarders/Barriers: Perm Ratings and Puncture
stated above the American Concrete Institute's ACI 302.2R-06
NXT™ SUBSTRATE PREPARATION AND PRIMER GUIDE TDS 230N
ACI 302.2R-06 “Guide for Concrete Slabs that Receive Moisture Sensitive Flooring” and ASTM F710 “Standard. Practice for Preparing Concrete Floors to Receive
Product Distinction: Barrier One “PIA”® is an advanced concrete
Aug 20 2021 Barrier One concurs with ACI 302.2R-06 that any slab receiving moisture sensitive flooring; “shall be cured & covered with.
