If a BB30 frame remove the c-clips/bearings so frame shell is empty. • Before riding the bicycle
Praxis Works Bottom Bracket products are warranted to be free from defects tool to unscrew the Drive cup first but also a 'Cup' removal tool for when ...
Praxis Works Bottom Bracket products are warrantied to be free from defects in materials If a BB30 frame remove the c-clips/bearings so frame shell is.
Ensure that the BSA frame threads are clean and PF30 frame shell is clean
Praxis Works Bottom Bracket products are warranted to be free from defects in If a BB30 frame remove the c-clips/bearings so frame shell is empty.
Compatible with Praxis M35 Based cranks cranks. For maximum performance it is required to remove and periodically inspect/clean your Praxis Works bottom.
Praxis Works Bottom Bracket products are warrantied to be free from defects in materials or Remove the c-clips/bearings so frame shell is empty.
Praxis Works Bottom Bracket products are warrantied to be free from defects in materials If a BB30 frame remove the c-clips/bearings so frame shell is.
Praxis Works Bottom Bracket products are warrantied to be free from defects in For maximum performance it is required to remove and periodically ...
SUITE B. SANTA CRUZ CA 95060 www.praxis-works.com. Conversion BB Ensure that the frame BB shell is clean
Praxis Works LLC 820 SWIFT ST SUITE B SANTA CRUZ CA 95060 www praxis-works com Conversion BB Compatibility & Spec CRANKSET Compatible with SRAM GXP/ISIS2 cranks/spindle 68mm for ROAD cranks only - 73mm for MTB cranks only FRAME SHELL Only for BB30 PF30 frames Specialized OSBB Road 68mm or 73mm
M30 BEARING REBUILD KIT M30 REPLACEMENT BEARINGS IMPORTANT : You are required to use proper bearing installation/removal tools to pull/press these bearings into a Praxis bottom bracket Failing to use correct tools can and will damage your new bearings and/or your BB and void your warranty
Home » PRAXIS » PRAXIS M30 WORKS bottom bracket Instruction Manual M30 BB30/PF30 68MM ROAD OR 73MM MTN Instruction Manual Contents [ hide 1 SAFETY INFORMATION – READ BEFORE RIDE 2 WARRANTY 3 BOTTOM BRACKET INSTALLATION 4 BB REMOVAL 5 BB DUST COVER SETUP 6 BB DUST COVER GUIDE 7 Documents / Resources 7 1 References 8 Related Posts
• Praxis Works assumes no responsibility for damages or injury related to improperly installed components READ THE STEP BY STEP INSTRUCTIONS PROVIDED ON THE OTHER SIDE SAFETY INFORMATION - READ BEFORE RIDE Rev G For Praxis M24 MTN/Road Cranks and SRAM GXP™ Cranksets M24 BB BB30/PF30 Compatibility and Spec
CARBON BB SHELL BB 1 Clean the carbon BB shell with solvent to remove any grease 2 Use Loctite Super?ex RTV Silicone Adhesive (Room Temp Vulcanizing) 3 Spread a thin coat of the RTV Silicone around the carbon BB shell and on the outer bearing race 4 Once pressed it must cure for 24hrs before riding Next page INSTALLATION
1 praxis bb series m30 press-fit 2 safety information – read before ride 3 warranty 4 compatibility and spec 5 required tools 6 included parts 7 frame & bearing preparation 8 bottom bracket installation 9 bb removal 10 bb dust cover setup 11 bb dust cover guide 12 documents / resources 12 1 references 13 related posts praxis bb series m30
BB REMOVAL 1 Unscrew the Right/Drive Cup COUNTER-CLOCKWISE and remove Use one tool to hold the Left side for leverage and the other to unscrew the Drive cup 2 Once the Drive Cup is removed slide a headset cup removal tool through from the drive side and it will catch the outside edge of the Non-Drive cup 3