Conventions relatives aux conseils techniques Cisco. Aug 7 05:15:13 BST: %SONET-4-ALARM: POS4/7: LRDI cleared Aug 7 05:16:42 BST:.
24 oct. 2006 Alarms at SONET's Layers. Alarm Indicators. Troubleshooting. Troubleshoot with loopback Commands. Configure an Interface for Internal ...
The following table lists the types and sub types of SONET Alarms. Table 1: SONET Supported Alarms. Sub Alarm Type. Alarm Type. • LOS — Loss of Signal.
Layer 1 SONET transport technology on the Cisco XR 12000 Series Router. In the following example
Configure traffic shaping for Frame Relay as described in the Cisco IOS Quality of Service Solutions. Configuration Guide under “Configuring Distributed Traffic
30 juil. 2020 Alarms 3. CHAPTER 2. SONET Alarms 3. Alarms at SONET Layers 3. SDH Alarm 5. Alarm Profiling and Auto In-Service States 9. CHAPTER 3.
To enable automatic insertion of a line alarm indication signal (LAIS) in the sent SONET signal whenever the SONET port enters the administrative shutdown state
alarms enabled by default use the no report [b1-tca
Cisco Transport Controller (CTC) detects and reports SONET alarms generated by the Cisco. ONS 15310-CL and the larger SONET network.
Cisco Transport Controller (CTC) detects and reports SONET alarms generated by the ONS 15600 and refer to the Cisco ONS 15600 Troubleshooting Guide.