Send document comments to nexus1k-docfeedback@cisco.com. 8-1. Cisco Nexus 1000V System Management Configuration Guide Release 4.0(4)SV1(1).
Configuring NTP. This chapter describes how to configure the Network Time Protocol (NTP) on the Catalyst enterprise. LAN switches.
You can configure NTP to use a specific source IP address. SUMMARY STEPS. 1. switch# configure terminal. 2. [no] ntp source ip-address. Cisco Nexus
Configuring NTP. This chapter describes how to configure the Network Time Protocol (NTP) on CIsco MDS 9000 Family switches. • Information About NTP page 1.
Cisco ME 1200 Series Carrier Ethernet Access Devices NID Configuration Guide Cisco IOS 15.6(1)SN and Later Releases -Configuring NTP.
Figure 8-1 displays a network with two NTP stratum 2 servers and two switches. Page 2. 8-2. Cisco Nexus 1000V System Management Configuration Guide Release 4.0
Manually distribute NTP authentication keys on the NTP server and Cisco NX-OS devices across the network. • If you are using the switch as an edge device and
Configuring NTP. This chapter describes how to configure the Network Time Protocol (NTP) on Cisco MDS 9000 Series switches. • Information About NTP on page
When you enable and synchronize the system time clock using an NTP server you must reboot the Cisco. Enterprise NFVIS so that the BMC or CIMC date and time
Manually distribute NTP authentication keys on the NTP server and Cisco NX-OS devices across the network. • If you are using the switch as an edge device and