Mark the position on each wall for the pole sockets. Determine the width of the closet rod needed to span the brackets taking care to include the distance
Z1201 and Z1202 EZCarry™ High Performance Water Closet Carrier System. OPTIONS and VARIATIONS X = distance closet is to be located from finished wall.
Select the hardware that is right for your wall type: 2. Hang track location SuperSlide® with Closet Rod & Support always use 12 in. brackets.
more than 4” from the end of the shelf. 4. Securing Standards. Each Standard must be secured to the wall with Closet Rods can be cut using a pipe cutter.
S = Depth closet horn. 1/16" = Distance closet is to set away from finished wall. *D = 1/2" for felt gasket and 3/8" for neoprene gasket. NOTE: When the fixture
the wall while leveling and marking the rest of the holes. n Take out old shelving and closet rods. ... Remove the screw from the dark blue anchor.
Wall. Weight of Pipe. Suggested. Recommended. Pipe Size. Pipe O.D.. Thickness. Weight of Pipe. Filled with Water. Maximum Span*. Hanger Rod Sizes.
Miscellaneous Charts – Piping Tubing
Select the hardware that is right for your wall type: than 4 in. from the end of the shelf. ... SuperSlide® with Closet Rod & Support always use 12.
Closet Pole Hook. • Mounting Screws. STEP 1: Measure 86" from the floor and make two marks on the wall with a pencil (Figure 1).