PFD 85010_Revision G_ECN 8839_LE Series Owner-Operator

water and Ultrasonic Weapon Cleaning Solution following instructions on label. Next

Reprocessing Guidelines

Use an enzymatic cleaner like Enzymax™ Dual Enzyme Ultrasonic Detergent Hollow instruments

UniqueTek “Tips” File #9: - “Ultrasonic Cleaning of Firearms”

An Ultrasonic Cleaner is considered the “last word” in firearms cleaning. But there is also mystery fear and misconceptions about them.

Instructions for use

ultrasonic bath/disinfection bath. Cleaning the coolant channel. Blow through the coolant channel with the air gun. If the exit openings or coolant 

Gun care - Guide

Cleaning in the ultrasonic bath . Gun cleaning is a topic in which there are countless different tips opin- ions and myths. Reasons for the large ...

Ultrasonic Cleaners Operators Manual

Ultrasonic Cleaners when used in accordance with manufacturer's instructions and Do not touch the stainless steel tank or cleaning solution -- they may.

Cleaning the tip nozzle for the precision head

Cleaning the tip nozzles by ultrasonic cleaner After removing the cleaning wire blow air onto the nozzle tip with the air gun again.

H540/CV54 Manual

Cleaning Instructions . assembly that consist of an ultrasonic power supply and a hand gun. ... check the ventilation grille and clean as necessary.

Sonic and ultrasonic tips

The cleaning of sonic and ultrasonic tips ultrasonic tips and cooling adapters in a cleaning/disinfection tank ... the compressed air gun close to the.

Instructions for use Piezo Scaler

Manual cleaning. Do not place the medical device and the tip changer in liquid disinfectant or in an ultrasonic bath. Clean and disinfect diamond coated 

AT THE GUN COUNTER - Pro Ultrasonics

jewelry looks brand-new Ultrasonic cleaning is like a facelift for metal parts and this includes firearms you service in your store Adding an ultrasonic cleaner to your shop could be a benefit for you and your customers The same ultrasonic units used in a jewelry store or medical offices can clean everything from the tiniest screws

Ultrasonic Gun Cleaning: How Does It Work and Is It Effective?

Basic Cleaning Step By Step 1 Field strip the gun 2 Swab the bore with a good defouler like Hoppes #9 3 Insert the stainless steel basket into the ultrasonic cleaning system 4 Insert the polycarbonate tray into the stainless steel basket Ride The Waves Ultrasonic Gun Cleaning Equipment

UniqueTek “Tips” File

Even without a heating element the ultrasonic energy will cause some heating of the solvent especially during long cleaning cycles Some cleaning solutions Adequate ventilation should be provided and the tank should be kept covered at all times to minimize evaporation

• How An Ultrasonic Gun Cleaner Works

  First of all, we recognize that firearm owners are well aware of the importance of using brushes, sprays, pads and lubricants to clean their equipment after each use. But these manual methods are unlikely to access contaminants in cracks, crevices, blind holes and other restricted surfaces that if allowed to remain may interfere with the reliable o...

• Do Field-Strip The Weapon

  Most people with experience in handling weapons understand that field-stripping and disassembling are part of the task of cleaning by hand. The same holds true for ultrasonic gun cleaners. The ultrasonic cleaner works at its best on these smaller parts, where the microscopic bubbles penetrate into the hard-to-reach holes, cracks and crevices that h...

• Don't Clean Wood Or Ivory Parts in An Ultrasonic Gun Cleaner

  Intense cavitation action is highly effective at cleaning metal surfaces, but it can be too much for some non-metal parts. Components made of wood or ivory can warp, crack or be otherwise damaged by temperatures and agitation found within an ultrasonic cleaning bath. Other methods should be used to clean these parts separately from the weapon's cor...

• Do Maintain The Weapon After Cleaning

  After ultrasonic cleaning, users will need to rinse, dry, and lubricate the weapon components. The maintenance tasks must be done within a few minutes of the end of the cleaning process, as humidity and pollutants in the air can undo much of the efforts to keep the weapon clean and rust-free. To accomplish this we strongly recommend an ultrasonic l...

• Don't Use Flammable Solvents

  Flammable solvents spell danger both from a use and disposal standpoint. Ultrasonic cleaning formulas designed for cleaning firearms are water based and biodegradable. If “water based” causes you to pause, properly administered ultrasonic cleaning and lubricating cycles eliminate rusting concerns.

• Do Follow Ultrasonic Gun Cleaning and Lubricating Procedures

  Cleaning solution and lubricating formulations designed for an ultrasonic gun cleaner help speed the process and protect your firearm. An excellent cleaning solution formulation is biodegradable GunClean L6 concentrate available from iUltrasonic. Designed to quickly clean rifles, pistols and other firearms it quickly removes powder residues, bullet...

• Examples of Ultrasonic Gun Cleaning Systems

  Ultrasonic gun cleaners are available in several sizes and features. Here are two examples available from iUltrasonic. Cleaning Hand Guns For cleaning pistol components, we suggest the HCS-200 ultrasonic gun cleaning kitsized for two full size semi-automatic handguns or a 6-inch revolver. Designed and manufactured in the USA for law enforcement per...