This Indian Standard ( Part 2 ) ( First Revision ) was adopted by the Bureau of. 20 April 1989 after the draft finalized by the Structural Engineering
IS 6533 (Part 2) : 1989. 1. Indian Standard. CODE OF PRACTICE FOR DESIGN AND. CONSTRUCTION OF STEEL CHIMNEY. PART 2 STRUCTURAL ASPECT. ( First Revision ).
Part 2 Structural aspects. The present practice of design ofsteel chimney recognizes the influence of aerodynamic shadow on the height of chimney and this
Factors to be considered while estimating the design wind speed/pressure. 3.3.2 IS 6533 (Part-1): 1989. Indian standard design and construction of steel stacks-
2. IS 6533 (Part-2): 1989 “Indian Standard Code of practice for design and construction of steel chimneys "structural aspects.
Also inside diameter of the chimney shell at top as per IS 6533 (Part 1): 1989 is given by: Abstract: Most of the Industrial chimneys are tall structures
According to the (IS-6533 part-2:1989) if period of natural oscillation for the cantilever steel chimney exceeds 0.25 seconds
The shaded portion in the figure represents the region acceptable by the design code IS 6533. (Part 2): 1989. According to code base diameter should be 1.6.
IS-6533 Part 21989. * Technical Report No. 7- High Mast for Lighting & CCTV. *BS-5649-1985. The Quality Control Department continuously tests and monitors
04-May-2018 per Indian Standard IS 6533 (Part 1 & 2):1989 through an example calculation. A typical chimney ... applicable only for manual calculations.