Automobile Engineering is a degree course of four year duration
Students who are planning to pursue this course should have a science background (PCM) and should have passed their 10+2 or any equivalent exam from CBSE or a recognised board and must have studied Chemistry, Physics, and Mathematics as main subjects
What is automotive engineering?
Automotive engineering is the study of how vehicles work, and how they’re designed, built and maintained
A degree in automotive engineering will give you a good understanding of engineering science, and how it is applied to the development of automobiles
Automotive engineering as a course
Installing wheels on a vehicle so that the wheels' faces are not completely parallel
In automotive engineering, toe, also known as tracking, is the symmetric angle that each wheel makes with the longitudinal axis of the vehicle, as a function of static geometry, and kinematic and compliant effects. This can be contrasted with steer, which is the antisymmetric angle, i.e. both wheels point to the left or right, in parallel (roughly). Negative toe, or toe out, is the front of the wheel pointing away from the centreline of the vehicle. Positive toe, or toe in, is the front of the wheel pointing towards the centreline of the vehicle. Historically, and still commonly in the United States, toe was specified as the linear difference of the distance between the two front-facing and rear-facing tire centerlines at the outer diameter and axle-height; since the toe angle in that case depends on the tire diameter, the linear dimension toe specification for a particular vehicle is for specified tires.
In automotive engineering
Installing wheels on a vehicle so that the wheels' faces are not completely parallel
In automotive engineering, toe, also known as tracking, is the symmetric angle that each wheel makes with the longitudinal axis of the vehicle, as a function of static geometry, and kinematic and compliant effects. This can be contrasted with steer, which is the antisymmetric angle, i.e. both wheels point to the left or right, in parallel (roughly). Negative toe, or toe out, is the front of the wheel pointing away from the centreline of the vehicle. Positive toe, or toe in, is the front of the wheel pointing towards the centreline of the vehicle. Historically, and still commonly in the United States, toe was specified as the linear difference of the distance between the two front-facing and rear-facing tire centerlines at the outer diameter and axle-height; since the toe angle in that case depends on the tire diameter, the linear dimension toe specification for a particular vehicle is for specified tires.