In a network with multiple routing protocols the exchange of route Administrative distance is the feature that routers use in order to select the best ...
admin distance
Note: Administrative distances are set from the Network > Virtual Routers > vr_name Note: When multiple redistribution profiles are defined the “more ...
The NAT (Network Address Translation) status and number of NAT rules are displayed. EdgeRouter uses administrative distance as a metric to.
EdgeOS UG
Local Distance Definition – Administrative distance for BGP local routes. Local routes are networks configured with the network command. (default 200).
Using the Network command to define active IP interfaces. administrative distance default routes
howto aw config basic ospf routing revd
Cisco recommends that you use static routes in environments where network traffic An administrative distance is the metric used by routers to choose the ...
l route cgr
1.0 network is established through 192.168.100.0. The defined administrative distance is 2. The route goes to a router with IP address. 192.168.100.1. Step 9
smb configure ipv static routes settings on a switch
Most networks use dynamic routes to communicate between routers but Static routes have a default administrative distance of 1. A router prefers a static ...
b cisco nexus series nx os unicast routing configuration guide x chapter
To configure an administrative distance for routes learned through DHCP If you do not define a network scope
m dh dm
Directly connected networks (those defined on an interface) have the distance 0 so they are always preferred. Static routes have a default distance of 1
fptd fdm routing