peels Accepts any finish, resists abrasion NO-COAT SAVES LABOR † Reduces installation time significantly † Rolls and pre-cut lengths allow for fast application A Radical Departure from Corner Bead For more than 80 years, drywall contractors have reached for corner bead because it has been the only option available – not
bead onto corner into position, ensuring it is aligned; embed it into compound by running the knife at 45° angle Let dry for 24-hours Apply a second coat with the 7" knife, allowing knife to rest on nose of the bead Let dry for 24-hours and apply a third coat After another 24-hours, sand the corner to a smooth finish Finishing FasTeners
DRYWALL CORNER FINISHING NO-COAT corners incorporate a tapered structural laminate design that consists of three key components: 1 Tapered copolymer core capable of withstanding severe impacts 2 Joint tape that permanently bonds the corner to drywall with Taping or All-Purpose joint compound 3
The result is a clean, precise corner that is long-lasting and not subject to fastener popping PLATINUM PAPER-FACED DRYWALL TRIMS APPLICATIONS Standard Outside and Inside Corners for most square corner applications Offset Outside and Inside Trims designed for 135º corners L-Trim is used to trim wallboard where it abuts with untrimmed door
Curve - Corners for Drywall The easiest way to create curves in drywall: 90 degree Internal Corners 90 degree External Corners 180 degree End-caps Column Covers Arches Installs and finishes like drywall Standard drywall thickness (1/2” & 5/8”) Saves time on the jobsite Reduces framing Saves installation time The advantage of curves:
fits any inside or outside corner angle and creates crisp, straight lines NO-COAT ARCH ARCH tape-on arches have notched flanges that flex and conform to any arch Stiff profile fine-tunes poor framing and creates a perfectly smooth, round curve Flexible Corner 325 3 25" wide x 100' roll (82 6 mm x 30 48 m) Flexible Corner 450 4 5" wide x 100
any inside or outside corner angle and creates crisp, straight lines Corner Finishing NO-COAT Joint tape that permanently bonds the corner to drywall with
accepts any finish Drywall corner trim that flexes to any inside or outside corner angle Product Data onto the wall, and requires less mud to apply and finish
makes the tape easier to conceal with the following coats To finish tapered joints, follow the same procedure Allow to dry 11 First Coat, Inside Corners – Use
the ability to quickly install and adjust any corner from a 70 degree inside angle to a 70 degree outside corner instant drywall corner finishing This system will
The finished appearance of a drywall wall or ceiling is largely depen- dent upon the Interior Systems Construction Association (CISCA), Gypsum Association product SHEETROCK/BEADEX Brand Paper Faced Metal Corner Bead is a