Loading...
peels Accepts any finish, resists abrasion NO-COAT SAVES LABOR † Reduces installation time significantly † Rolls and pre-cut lengths allow for fast application A Radical Departure from Corner Bead For more than 80 years, drywall contractors have reached for corner bead because it has been the only option available – not
bead onto corner into position, ensuring it is aligned; embed it into compound by running the knife at 45° angle Let dry for 24-hours Apply a second coat with the 7" knife, allowing knife to rest on nose of the bead Let dry for 24-hours and apply a third coat After another 24-hours, sand the corner to a smooth finish Finishing FasTeners
DRYWALL CORNER FINISHING NO-COAT corners incorporate a tapered structural laminate design that consists of three key components: 1 Tapered copolymer core capable of withstanding severe impacts 2 Joint tape that permanently bonds the corner to drywall with Taping or All-Purpose joint compound 3
The result is a clean, precise corner that is long-lasting and not subject to fastener popping PLATINUM PAPER-FACED DRYWALL TRIMS APPLICATIONS Standard Outside and Inside Corners for most square corner applications Offset Outside and Inside Trims designed for 135º corners L-Trim is used to trim wallboard where it abuts with untrimmed door
Curve - Corners for Drywall The easiest way to create curves in drywall: 90 degree Internal Corners 90 degree External Corners 180 degree End-caps Column Covers Arches Installs and finishes like drywall Standard drywall thickness (1/2” & 5/8”) Saves time on the jobsite Reduces framing Saves installation time The advantage of curves:
fits any inside or outside corner angle and creates crisp, straight lines NO-COAT ARCH ARCH tape-on arches have notched flanges that flex and conform to any arch Stiff profile fine-tunes poor framing and creates a perfectly smooth, round curve Flexible Corner 325 3 25" wide x 100' roll (82 6 mm x 30 48 m) Flexible Corner 450 4 5" wide x 100