[PDF] PL-Heat Press 5-in-1 Set - Perfect Laser

127897_320202055020PL205_IN_120Heat20Press20Manual.pdf

Transfer productT-Shirts / Mugs / Caps / Plates

Transfer size

29x38cm, 11oz

144x82cm

8 inch / 10 inch

Power1250W / 300W

Temperature0-399 °F

Time range0-999sTECHNICAL INSTRUCTION GUIDE

Researched, written, edited and designed by Perfect Laser staff.

Owners ManualPL-Heat Press 5-in-1 Set

TIG #07

HEAT PRESS

August 2020

Project #550

OWNERS

NAME

© Copyright: The content of this document is subject to copyright protection. Reproduction of the content, or any part of it, other than for personal, non

-commercial use, is prohibited without prior consent from Perfect Laser Technologies (Pty) Limited and other protected parties.

Summarize

The heat press is engineered to imprint a design or graphic onto a substrate by using heat and pressure for a preset period of time. While heat presses are often used to apply designs to fabrics, such as t-shirts, they can also be used to imprint designs on mugs, plates, jigsaw puzzles and other products. Using sublimation ink, the pattern/image is rst printed onto sublimation paper, before it is transferred onto the substrate. Highly effective patterns and great effects can be achieved through this technique

Process of a heat press

Related equipment

• Camera or scanner Obtain images directly from your camera, scanner or computer. • Computer Use a computer with photo processing software to covert the images to the required size, color and shape. • Ink Heat presses use a special sublimation ink to transfer images onto mugs, etc. You can use normal dye ink for T-shirt transfers. • Continuous ink system (CISS) If you use the transfer sublimation ink, ensure that you use the separate continuous ink system. • Printer If using a printer, use EPSON ink-jet printer inks only. For mug printing, use the settings as shown below. • Paper Use heat transfer paper for imprinting onto mugs, plates and metal plate transfers. Ensure that the image is mirrored. Use the light T-Shirt transfer paper for printing on light coloured T-Shirts. Ensure that the image is mirrored. Use the dark T-Shirt transfer paper for printing on dark

T-shirts. Ensure that the image is not mirrored.

• Machine There are a series of heat press machines, designed for different sublimation applications ie. mug press, plate press, cap press, T-shirt press, combo press and so on. All the machines' operations are almost the same, with just temperature and baking time variations.

Basic preparation before using

• Before you use the machine, please check whether the power supply conforms to the rated voltage of the machine. The unit needs to be earthed via a 3 pin plug. • When you replace the burned heat press parts, it is important to rst shut down the unit completely and disconnect the mains supply. • Please use insulated heat protective gloves when you need to replace the top of heat press under the high temperature conditions. • Also, please insert the heat shield to prevent damage as a result of the high temperatures. • Do not insert any sharp objects in the heat press that could damage the heater block. • During use, be very careful not to allow your body to touch any of the hot surfaces which could result in burns. • During use, do not touch the pressure spring which could result in injuries. . • Do not apply excessive force when pressing down on the press. By adjusting the pressure handle properly, you will prevent damage to the unit. • Do not allow unsupervised access to the machine even whilst not in use as some parts might still cause burns or injuries. • When changing the heating element, ensure that the power plug is disconnected. After changing the element - re-connect the power plug into the control box. • Do not use the heating pad for any other use other than what it was designed for. NOTE: Before using your machine, you will need to change the temperature from Farenheit to Celcius. To do this: Turn ON the machine. HOLD the temp + & Temp button together; then press the mode key onces. Here you will see if it is F (Farenheit) or C (Celcius). Use the TEMP button to change it. After this is done, press the mode key twice and you are ready to start working.

© Copyright: The content of this document is subject to copyright protection. Reproduction of the content, or any part of it, other than for personal, non

-commercial use, is prohibited without prior consent from Perfect Laser Technologies (Pty) Limited and other protected parties.

Setting for control meter

For Normal Control Box Setting

1. Reset key 2. Power key 3. Subtract key 4. Mode key 5. Add key 6. Execute key 7. Socket for pad • The original temperature: Press the MODE KEY once; the set indication light will be on; Press the key ‘-' or key '-' to set original temperature. • The max temperature: Press the MODE KEY the second time; the temperature indication light will be on; press the key

‘-' or key '-' to set the max temperature.

• The max heat press temperature: Press the MODE KEY the third time; the time indication light will be on; press the key

‘-' or key '-' to set the max heat press time.

• Execution mode: Press MODE KEY the fourth time; the machine will go into ready state.

Touch screen control box

operation instruction • The traditional intelligent multi-function heat transfer machine has many manual operating controls eg temperature settings, timers, speed etc. This requires trained personnel with obvious costs attached. • Our series of user-friendly intelligent touch screen controls, make this function far simpler and more accurate. • The on-board controller supervises temperature, timers, material classication, picture and various other technical parameters. • This greatly simplifies the whole printing process and requires a lot less input from the operator.

Starting

• Turn the power on. • Press the home key to enter the language choice menu. • Choose the language which you will use. • Enter into the products choice menu. • Choose the product which you are wanting to produce. • There are 3 options in the menu. Work Self Check Product Description • Click on the appropriate name into the corresponding function, by clicking on the upper left corner of the screen arrow to return to the main menu. Work • Select work in the main menu. • Set the interface will enter the product parameters setting interface. The ve words in the lower left corner of the screen are the specic product names, according to the need, click on the name of the product. • The three parameters at the top of the screen are temperature, time and quantity. • According to the different products, preset the temperature and time. • Based on the actual print, modify the quantity parameters. • Click on the blue digital screen, and then click on the lower right corner of the digital keyboard to modify the required values according to the actual need. • After setting product, select 'Confirm' to enter the corresponding product interface. • The first line of the operation interface is the product name. • The second line is temperature display, which controls the heating element to the actual temperature. • When the temperature rises to the set temperature, it will keep the state of constant temperature. • The third line is executive times. When the temperature reaches to constant temperature, it will trigger the time countdown. When the countdown reaches zero, it will start the buzzing alarm. • The fourth line displays the quantity that has been completed.

Self check

• Choose 'self check' in the main menu. • The total running time of the machine will be reected. • The following lines are printed for each of the products corresponding to the number of. • Click the return arrow to return to the main menu. About • In the main menu and select 'About' and it will show the software"s current version.

Operation process

• In the main menu select 'work'. • Select the product name; enter; • Select parameters that need to revised, enter; • Input parameters, enter; • Wait for temperature to the settle temperature enter; • Pressing handle (or click 'confirm'); enter • Wait for the countdown to finish ie when you hear the alarm buzzing; • Lift the handle; click the back arrow to return to the previous step. • When you shut down automatically, you can open it up by pressing the || key.

Branches Nationwide

Branches open every Saturday

087 135 3346

PORT ELIZABETH

087 135 3026

BLOEMFONTEIN

087 135 3362

GEORGE

087 135 3027

DURBAN

087 135 3028

CAPE TOWN

087 135 3444

BIG MACHINE SHOP

087 135 2958

JOHANNESBURG

Based in Johanneburg,

Gauteng

PERFECT LASER TECHNOLOGIES (PTY) LIMITED

© Copyright: The content of this document is subject to copyright protection. Reproduction of the content, or any part of it, other than for personal, non-commercial use, is prohibited without prior consent from Perfect Laser Technologies (Pty) Limited and other protected parties.

HEAD OFFICE

451 Vale Avenue, Ferndale, Gauteng, South Africa

National Support +27 (0) 87 135 3024

techsupport@perfectlaser.co.za