Panel Voltmeter - Ammeter - Frequency meter Direct or alternative
60Hz option for 400 Hz. - compatible with wave train
Panel Meters and Controllers Autoranging Frequency Meter Type
Autoranging Frequency Meter. Type DI3-72 F1K. Type Selection. Power supply. A: 24 VAC -15 -15% +10%
TRMS panel Voltmeter Ammeter
http://www.loreme.fr/fichtech/IPL36l_eng.pdf
Untitled
INPUT: AC 3PH 200-230V 50/60 Hz 0.9A. Identifying the Parts. Chapter 1 The frequency meter displays 0 to 60Hz at 0 to 3V. 10V X n45 setting. 1.00.
2558A AC Voltage Current Standard
Mode. : Internal / External / FREQUENCY METER. Internal : 50 / 60 / 400 Hz. VAR (40 to 1000 Hz 0.001 Hz resolution). External : EXT1 / EXT2. (Use the terminals
crompton instruments - analogue meters for marine applications
• Burden frequency meter - reed type - 0.7 … 1.2 VA at nominal voltage 110-230 4) Specify frequency: 50/60 Hz. 3-phase 4-wire balanced or. 3-phase 4-wire ...
SPECIFICATION GUIDE ELECTRIC MOTORS
1 Connection to Different Frequencies. Three-phase motors wound for 50 Hz can also be connected to a 60 Hz network a ) By connecting a 50 Hz motor
crompton-instruments.com
60 Hz centre frequency. -0.15 accuracy. 55-65 Hz. •016-41S*-PNAN-AN. 400 Hz Class 2.5 frequency meter 0.5% of mid frequency. Scaling. To BS89
DIN panel meters – short scale
Interchangeable slide-in dials are used on the. E242 E243
Panel Meters and Controllers Autoranging Frequency Meter Type
3-dgt µP-based frequency indicator. • 1.0 to 999 Hz Autoranging Frequency Meter. Type DI3-72 F1K. Type Selection ... 50/60 Hz (standard). Options.
Analogue Instruments
Meter uses a 100 microamp 4000 ohm movement driven by an EMC hard frequency Frequency: 50/60Hz. Accuracy: Moving iron ammeter: Class 1.5. MDI: Class 3.
Untitled
5 to 120 HZ (Frequency setting: in increments of 0.25HZ at 0 to. 60HZ in increments of 0 5HZ at 0 to Connects to frequency meter
Digital Panel Meters Autoranging Frequency Meter Type DI3-72 F1K
3-dgt µP-based frequency indicator. • 1.0 to 999 Hz Autoranging Frequency Meter. Type DI3-72 F1K. Type Selection ... 50/60 Hz (standard). Options.
Untitled
Shows deceleration torque for an uncoupled motor decelerating from 60Hz w/ shortest Frequency (fault output). Meter. Contact Output. (output during run).
din panel meters - tes crompton instruments
50/60 Hz (Single frequencies 25 Hz - 1 kHz on request). PRODUCT CODES Meter uses a 100 microamps 4000 ohm movement driven by an EMC hard frequency.
crompton instruments - analogue meters for marine applications
Integrated selector switch reduces installation time and links the meter with some VT`s having primary voltage less then 1kV). Frequency. 50/60 Hz.
Untitled
(4) For JUSPEED-F with an operator's panel a frequency meter
Panel Voltmeter - Ammeter - Frequency meter Direct or alternative
The 94000CA is a digital meter for voltage or current measurement frequency range : 0...50...60Hz option for 400 Hz ... 94000-Hz (frequency meter).
crompton instruments - analogue meters for marine applications
Integrated selector switch reduces installation time and links the meter with some VT`s having primary voltage less then 1kV). Frequency. 50/60 Hz.
1.0 to 999 Hz
Autoranging capability
72 x 72 mm
Degree of protection (front): IP 50 (IP 65 on request)Product Description ModelRange code
Measurement
Power supply
Setpoints
Options
Ordering Key
DI3-72F1KAD0XX
3-dgt µP-based frequency
meter with autoranging capa- bility. The housing is for panelmounting and ensures a degree of protection (front) ofIP 50 (IP 65 on request).
Panel Meters and Controllers
Autoranging Frequency Meter
Type DI3-72 F1K
Type SelectionPower supply
A:24 VAC, -15% +10%,
50/60 Hz
1)B:48 VAC, -15% +10%,
50/60 Hz
1)C:115 VAC, -15% +10%,
50/60 Hz
1)D:230 VAC, -15% +10%,
50/60 Hz (standard)
Options
XX:None (standard)
EX:Degree of protection
IP 65Rated input500 VAC, 1 to 1000 Hz,
autorangingOverload protectionContinuous 1.2 x rated input
For 1 s 2 x rated input
Accuracy
Temperature drift± 100 ppm/ºC
Display7-segment LED, h 14.2 mm,
3 digits
Sampling rate1 time/s
Indication
Max. 999
Min. 0.00
Over range EEEInput voltage9 to 500 VAC
Input impedance500 kΩ
Input Specifications
1)Power supply on request
AC supply230 VAC, -15% +10%,
50/60 Hz (standard)
24 VAC, 48 VAC, 115 VAC,
-15% +10%, 50/60 Hz (on request)Power consumption3.2 VA
Supply Specifications
Operating temperature0 to 50°C (32 to 122°F) (R.H. < 90% non-condensing) Storage temperature-10 to 60°C (14 to 140°F) (R.H. < 90% non-condensing)Insulation reference voltage 300 Vrmsto ground
Dielectric strength4000 Vrmsfor 1 minute
Noise rejection
CMRR 100 dB, 40 to 60 Hz
EMCIEC 60801-2, IEC 60801-3,
IEC 60801-4 (level 2),EN 50 081-1, EN 50 082-1
Safety standardsEN 61010-1, IEC 61010-1,
VDE 0411
ConnectorScrew-type
Housing
Dimensions 72 x 72 x 75 mm
Material ABS,
self-extinguishing: UL 94 V-0 Degree of protectionFront: IP 50 (IP 65 on request)Weight approx.
ApprovalsCE, CSA
General Specifications
2Specifications are subject to change without notice
DI3-72 F1K
66.5 x 66.5
68 x 68
Dimensions (mm)
1 2345678
INNCIN
AINV/HzPower supply
IN + 60 mVWiring Diagram
HzFront Panel Description
1. Display
3-dgt (maximum read-out 999).
Alphanumeric indication by means of 7-segment display for: - Displaying of the measured value, over-range.1Range Table
Measurement Dec. point Resolution
position1.00 to 9.99 Hz 9.99 0.01 Hz
10.0 to 99.9 Hz 99.9 0.1 Hz
100 to 999 Hz 999 1 Hz
(Automatic selection)quotesdbs_dbs4.pdfusesText_7[PDF] 60 hz to 50 hz
[PDF] 60 minute gentle flow yoga sequence
[PDF] 60 minute gentle yoga sequence
[PDF] 60 minutes australia cast
[PDF] 60 minutes australia coronavirus
[PDF] 60 minutes australia jeffrey epstein
[PDF] 60 minutes australia reporters
[PDF] 60 minutes australia sarah abo
[PDF] 60 minutes australia wet markets
[PDF] 60 minutes cast 1990
[PDF] 60 minutes cast 2000
[PDF] 60 minutes cast 2018
[PDF] 60 minutes cast death
[PDF] 60 minutes cast over the years