[PDF] FortiExplorer v2.2 build 1046 User Guide

View - Download FortiExplorer v2.2 build 1046 User Guide

Previous PDF

Next PDF

FortiExplorer v2.2 Build 1046

User Guide

FortiExplorer v2.2 Build 1046 User Guide

May 27, 2013

01-502-202417-20130527

Copyright© 2013 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, and FortiGuard®, are

registered trademarks of Fortinet, Inc., and other Fortinet names herein may also be trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance metrics contained herein were attained in internal lab tests under ideal conditions, and performance may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet's General Counsel, with a purchaser that expressly warrants that the identified product will perform according to the performance metrics herein. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet's internal lab tests. Fortinet disclaims in full any guarantees. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable.

Technical Documentationdocs.fortinet.com

Knowledge Basekb.fortinet.com

Customer Service & Supportsupport.fortinet.com

Training Servicestraining.fortinet.com

FortiGuardfortiguard.com

Document Feedbacktechdocs@fortinet.com

Page 3

Table of Contents

Change Log....................................................................................................... 5

Introduction....................................................................................................... 6

Supported models................................................................................................... 6

FortiGate............................................................................................................ 6

FortiWiFi............................................................................................................. 6

FortiSwitch......................................................................................................... 6

FortiAP ............................................................................................................... 6

FortiOS support ....................................................................................................... 6

FortiAP support........................................................................................................ 6

FortiSwitch support ................................................................................................. 6

Download FortiExplorer........................................................................................... 7

FortiExplorer software........................................................................................ 7

Installing FortiExplorer..................................................................................... 8

Installing FortiExplorer............................................................................................. 8

Microsoft Windows install.................................................................................. 8

Mac OS X install................................................................................................. 9

Configuration options .............................................................................................. 9

Updating FortiExplorer and firmware....................................................................... 9

Register your device from FortiExplorer................................................................ 10

Setup Wizard................................................................................................... 12

System settings ..................................................................................................... 12

Central management........................................................................................ 12

Admin password.............................................................................................. 13

Time zone......................................................................................................... 13

Network.................................................................................................................. 14

WAN topology.................................................................................................. 14

Primary WAN.................................................................................................... 15

Secondary WAN............................................................................................... 16

Load balancing ................................................................................................ 17

3G/4G modem ................................................................................................. 18

LAN settings..................................................................................................... 19

Security.................................................................................................................. 19

Schedule.......................................................................................................... 19

Internet access policy...................................................................................... 20

Virtual Server.................................................................................................... 20

Remote VPN .................................................................................................... 21

Summary................................................................................................................ 22

Table of Contents Page 4 FortiExplorer v2.2 Build 1046 User Guide Device Management Options........................................................................ 23

Connecting to the Web-based Manager ............................................................... 23

Connecting to the CLI console.............................................................................. 24

Firmware ......................................................................................................... 25

Add model ............................................................................................................. 25

Download firmware images ................................................................................... 26

Uploaded firmware ................................................................................................ 27

Watermark Tool.............................................................................................. 29

Using the DLP watermark tool............................................................................... 29

Apply watermark output message................................................................... 30

FortiExplorer command line Watermark tool......................................................... 31

Create a filter in FortiOS ........................................................................................ 32

USB Serial Console........................................................................................ 33

Supported models................................................................................................. 33

FortiGate.......................................................................................................... 33

FortiAP ............................................................................................................. 33

FortiSwitch....................................................................................................... 33

Accessing the USB serial console menu............................................................... 33

FortiGate BIOS menu............................................................................................. 34

Get firmware image from TFTP server............................................................. 34

Format boot device.......................................................................................... 35

Configuration and information menu ............................................................... 35

Boot with backup firmware and set as default................................................ 36

Quit menu and continue to boot...................................................................... 36

Display this list of options................................................................................ 36

FortiAP BIOS menu................................................................................................ 36

Get OS image from TFTP server...................................................................... 37

Quit this menu and continue to boot with default OS...................................... 37

Display this list of options................................................................................ 37

FortiSwitch BIOS menu ......................................................................................... 38

Get firmware image from TFTP server............................................................. 38

Format boot device.......................................................................................... 39

Configuration and information menu ............................................................... 39

Boot with backup firmware and set as default................................................ 40

Quit menu and continue to boot...................................................................... 40

Display this list of options................................................................................ 40

Fortinet Hardware Quick Inspection (HQIP)........................................................... 40

Index................................................................................................................ 42

Page 5

Change Log

DateChange Description

2013-04-10 Initial release.

2013-04-17 Added supported file type information for Watermark tool.

2013-05-27 Added USB Console Access chapter.

Introduction Page 6 FortiExplorer v2.2 Build 1046 User Guide

Introduction

FortiExplorer is a standalone software solution that allows you to connect to your FortiGate device using the USB interface of your management computer. FortiExplorer provides direct access to the FortiOS setup wizard, Web-based Manager, and CLI console. FortiExplorer also provides useful tools to allow you to manage firmware versions for various managed devices and a watermark tool which can be used to apply a watermark signature to confidential files.

Supported models

FortiExplorer v2.2 Build 1046 supports the following models.

FortiGate

FG-20C, FG-20C-ADSL-A, FG-40C, FG-60C, FG-60C-POE, FG-60C-SFP, FG-60D, FG-100D, FG-300C, FG-600C, FG-600C-DC, FG-800C, FG-1000C, FG-1000C-DC, FG-3240C, and

FG-3600C.

FortiWiFi

FWF-20C, FWF-20C-ADSL-A, FWF-40C, FWF-60C, FWF-60CM, FWF-60CM-3G4G-B,

FWF-60CX-ADSL-A, and FWF-60D.

FortiSwitch

FS-28C, FS-324B-POE, and FS-348B.

FortiAP

FAP-11C and FAP-28C.

See the FortiExplorer v2.2 Build 1046 Release Notes for additional information on FortiExplorer.

FortiOS support

FortiExplorer v2.2 Build 1046 supports FortiOS v5.0 Patch Release 2 or later.

FortiAP support

FortiExplorer v2.2 Build 1046 supports FortiAP v5.0 Patch Release 2 or later.

FortiSwitch support

FortiExplorer v2.2 Build 1046 supports FortiSwitch v1.0 Patch Release 2 or later. Introduction Page 7 FortiExplorer v2.2 Build 1046 User Guide

Download FortiExplorer

FortiExplorer is available for download from the Customer Service & Support web site ihttps://support.fortinet.com in firmware images and from the Fortinet Resource Center http://www.fortinet.com/resource_center/product_downloads.html. FortiExplorer is available for both Microsoft Windows and Mac OS X computers.

FortiExplorer software

The following FortiExplorer images are available from the Customer Service & Support site:

Microsoft Windows

FortiExplorerSetup_xp_2.2.1046.exe

This image includes the FortiExplorer executable, the Microsoft Windows USB driver library, and .net framework library.

FortiExplorerSetup_vista_win7_2.2.1046.msi

This image includes the FortiExplorer MSI file.

FortiExplorerSetup_win_upgrade_2.2.1046.msi

This image includes the FortiExplorer MSI file and the Microsoft Windows USB driver library.

FortiExplorer_OnlineInstaller_2.2.1046.exe

This image is an online installer for FortiExplorer. When run, it will download the full installer from the FortiGuard Distribution Servers (FDS).

Mac OS X

FortiExplorer-2.2.1046.dmg

This image includes the FortiExplorer executable, the Mac OS X USB driver library, and .net framework library.

FortiExplorer_OnlineInstaller-2.2.1046.dmg

This image is an online installer for FortiExplorer. When run, it will download the full installer from the FortiGuard Distribution Servers (FDS). The Watermark Tool is available for FortiExplorer v2.2 Build 1046 for Microsoft Windows only. Installing FortiExplorer Page 8 FortiExplorer v2.2 Build 1046 User Guide

Installing FortiExplorer

FortiExplorer provides a user-friendly tool that you can use to configure a FortiGate unit over a standard USB connection, rather than using a console cable or Ethernet connection.

Figure 1:Example connection to device

The following topics are discussed in this section:

Installing FortiExplorer

FortiExplorer is available for Microsoft Windows XP, Vista, 7, and 8. It is also available for Mac

OS X v10.6 Snow Leopard and higher.

Microsoft Windows install

To install FortiExplorer on a Microsoft Windows workstation:

1.Double-click the .msi, or .exe file and follow the instructions on-screen. If loading from the

CD, select the appropriate version for your operating system.

2.Connect the USB cable to the FortiGate unit and then to the management computer.

3.The FortiExplorer Fortinet Device Easy Configuration Utility opens when the USB cable is

connected. Select Install the hardware automatically and select Next.

WAN1WAN2USBDC+12V51234

USB MGMT DMZ RESET 67

USB A to

USB Mini-B Cable

USB A cable end into

Management ComputerUSB Mini-B cable end into

your Fortinet device When using the FortiExplorer setup wizard for the first time, ensure the FortiGate unit is using its factory default settings. Do not connect the USB cable until after FortiExplorer has been installed. Installing FortiExplorer Page 9 FortiExplorer v2.2 Build 1046 User Guide

4.After a moment, FortiExplorer will launch.

Mac OS X install

To install FortiExplorer on a Mac OS X workstation:

1.Double-click the .dmg file and drag the FortiExplorer program file into the Applications

folder.

2.Connect the USB cable to the FortiGate unit and then to the management computer.

3.Double-click the FortiExplorer icon to launch the application.

Configuration options

With FortiExplorer, you are provided a number of options on how to configure the FortiGate unit, depending on your level of comfort with various interfaces. The below image shows the FortiExplorer Tool connected to a FortiGate 60C device.

Figure 2:FortiExplorer tool

Updating FortiExplorer and firmware

FortiExplorer may be automatically updated from time to time. Select the checkbox at the bottom of the page to remember the device and check for updates with FDS automatically. FortiExplorer will also monitor firmware updates for your devices and provide an alert when one is available. FortiExplorer lists the three most recent firmware images that are available for your device on the main page. Installing FortiExplorer Page 10 FortiExplorer v2.2 Build 1046 User Guide

Register your device from FortiExplorer

You can use FortiExplorer to register your Fortinet device. By registering your device, you can download firmware images, receive FortiGuard service updates including virus and attack definitions, VCM updates, and access Fortinet Customer Service & Support. You can select to register the device to an existing FortiCare account, see Figure 3, or you can create a new FortiCare account, see Figure 4. To register the device to an existing FortiCare account, select Existing FortiCare User - FortiCare Login, enter your FortiCare username and password, select the country in the drop-down menu, select the reseller in the drop-down menu, and select Register. Figure 3:Register device to existing FortiCare account Installing FortiExplorer Page 11 FortiExplorer v2.2 Build 1046 User Guide To create a new FortiCare account, select New User - Create FortiCare Account, enter the applicable information in the required fields and select Register.

Figure 4:Register device to new FortiCare account

Once registration is complete, the device will reflect a Registered status on the FortiExplorer home page. Setup Wizard Page 12 FortiExplorer v2.2 Build 1046 User Guide

Setup Wizard

FortiExplorer allows you to configure your FortiGate unit using the setup wizard in FortiOS from the FortiExplorer shell.

System settings

Device system settings include central management, setting the admin password, and setting time zone information.

Central management

Select the checkbox to enable central management and enter the IP address of your FortiManager device. When central management is enabled, the setup wizard will allow you to configure the primary WAN and LAN settings. All other settings will come from the

FortiManager.

The setup wizard is intended for initial configuration of your device and includes basic settings. This chapter provides an overview of the options for a FortiGate system. The options in FortiAP and FortiSwitch are not covered. Setup Wizard Page 13 FortiExplorer v2.2 Build 1046 User Guide

Figure 5:Central management page

Admin password

Select the checkbox to change the admin password. The default password is no password, leave the Old Password field blank and enter the new password. Changing the password will require re-authentication when the setup wizard is complete.

Figure 6:Admin password page

Time zone

Select the appropriate time zone for your location in the drop-down menu. When central management is selected, all further management will be performed on the

FortiManager.

Setup Wizard Page 14 FortiExplorer v2.2 Build 1046 User Guide

Figure 7:Time zone page

Network

Network settings include the WAN topology, primary WAN configuration, secondary WAN configuration, load balancing configuration, 3G/4G modem configuration, and LAN configuration.

WAN topology

Select a connection type for your Wide Area Network (WAN). Select one of the following options:

Single Ethernet

3G/4G modem only

Dual Ethernet

Ethernet with 3G/4G backup

The network menu is determined by the WAN topology selection. Menu items that are not applicable to the topology selected will not be available. Setup Wizard Page 15 FortiExplorer v2.2 Build 1046 User Guide

Figure 8:WAN typology page

Primary WAN

Select the connection type for your primary WAN connection. Select one of the following: DHCP, if your ISP automatically assigns you a dynamic IP address Static IP, if your ISP assigns you a specific IP address or a group of addresses Enter the IP address, netmask, default gateway IP address, and DNS server IP address for WAN1. PPPoE, if your ISP provided you with client software, a username, and a password

Enter the PPPoE username and password.

Setup Wizard Page 16 FortiExplorer v2.2 Build 1046 User Guide

Figure 9:Primary WAN page

Secondary WAN

Select the connection type for your secondary WAN connection.

Select one of the following:

DHCP, if your ISP automatically assigns you a dynamic IP address Static IP, if your ISP assigns you a specific IP address or a group of addresses Enter the IP address, netmask, default gateway IP address, and DNS server IP address for WAN1. PPPoE, if your ISP provided you with client software, a username, and a password

Enter the PPPoE username and password.

Contact your Internet service provider if you are unsure which Internet connection type to select for your primary WAN connection. This wizard menu is only available when selecting Dual Ethernet in the WAN Topology page. Setup Wizard Page 17 FortiExplorer v2.2 Build 1046 User Guide

Figure 10:Secondary WAN page

Load balancing

Load balancing allows you to balance traffic between the primary and secondary WAN interfaces.

Select one of the following:

Round Robin

Weighted Load Balance

Spillover

Contact your Internet service provider if you are unsure which Internet connection type to select for your secondary WAN connection. This wizard menu is only available when selecting Dual Ethernet in the WAN Topology page. Setup Wizard Page 18 FortiExplorer v2.2 Build 1046 User Guide

Figure 11:Load balancing page

3G/4G modem

Configure 3G/4G modem dialup account information. Enter your phone number, username, and password.quotesdbs_dbs14.pdfusesText_20

[PDF] fortigate 100d firmware upgrade

[PDF] fortigate 100d firmware version

[PDF] fortigate 100d flash memory

[PDF] fortigate 100d ipsec vpn configuration

[PDF] fortigate 100d ipsec vpn setup

[PDF] fortigate 100d manual book

[PDF] fortigate 100d memory upgrade

[PDF] fortigate 100d memory usage

[PDF] fortigate 100d ssl vpn limit

[PDF] fortigate 100d ssl vpn setup

[PDF] fortigate 100d user manual

[PDF] fortigate 100d user manual pdf

[PDF] fortigate 100d vpn client configuration

[PDF] fortigate 100e admin guide

[PDF] fortigate 100e configuration guide pdf