[PDF] FortiGate-60 QuickStart Guide 1 mar 2007 You can

View - Download FortiGate-60 QuickStart Guide

Previous PDF

Next PDF

© Copyright 2007 Fortinet Incorporated. All rights reserved. Products mentioned in this document are trademarks or registered trade- marks of their respective holders.

Regulatory Compliance

FCC Class A Part 15 CSA/CUS

1 March 2007

Checking the Package Contents

Connecting

1234

USBWAN2WAN1DMZ

DC+12V

InternalModem Console

Optional connection to DMZ network

Straight-through Ethernet cable connects

to Internet (public switch, router or modem)

Straight-through Ethernet cables connect

to computers on internal network

Power cable connects to power supply

Optional redundant connection to Internet

Optional connection to a serial modem

(serial to USB adapter required) Optional RJ-45 to DB-9 serial cable connects to management computer

Planning the Configuration

ConnectorTypeSpeedProtocolDescription

Internal RJ-4510/100 Base-TEthernetA 4-port switch connection for up to four devices or the internal network.

WAN1 and

WAN2 RJ-4510/100 Base-TEthernetRedundant connections to the Internet. DMZRJ-4510/100 Base-TEthernetOptional connection to a DMZ network or to other FortiGate-60 units for high availability (HA). For details, see the Documentation CD-ROM. ConsoleRJ-45 9600 BpsRS-232Optional connection to the management computer.

Provides access to the command line interface

(CLI). USBUSBUSBOptional connection for the FortiUSB key, modem or backup operation. Place the unit on a stable surface. It requires 1.5 inches (3.75 cm) c learance above and on each side to allow for cooling. Plug in power cable to unit before connecting power. and running. Connect the FortiGate unit to a power outlet and to the internal and ext ernal networks. mode (the default) or Transparent mode.

NAT/Route mode

In NAT/Route mode, each FortiGate unit is visible to the network that it is c onnected to. All of its interfaces are on different subnets. Each interface that is connected to a network must be address that is valid for that network.

NAT/Route mode when the

FortiGate unit is deployed

as a gateway between pri- vate and public networks.

In its default NAT/Route

Firewall policies control

communications through the FortiGate unit. No operate in NAT mode or in Route mode. In NAT mode, the FortiGate unit performs network address translation before IP packets are sent to the destination network. In Route mode, no translation takes place.

Transparent mode

In Transparent mode, the FortiGate unit is invisible to the network. All of its interfaces are on

FortiGate unit in Transparent

mode on a private network behind a router. In its default tion, the unit functions as a through the FortiGate unit until these network segments.

Router

Internet

Internal

network Hub or switch

10.10.10.3

InternalWAN1

Gateway to public network

204.23.1.5 10.10.10.2

intrusion prevention (IPS), and virtual private networking (VPN).

FortiGate-60

01-30002-0032-20070301

manager and the default settings in NAT/Route mode. All you need to do is set your network computers to use DHCP, access the web-based addresses for up to 100 computers in the internal network.

Connect the FortiGate unit to the network.

Set the all the network computers to use DHCP to automatically obtain an IP address. The FortiGate internal interface acts as a DHCP server for the internal network and assigns IP addresses to all computers in the range 192.168.1.110 -192.168.1.210. web-based manager appears. Go to System > Network > and select Edit for the External interface. 1. 2. 3. 4.

Select one of the following Addressing modes

Go to System > Network > DNS.

Select one of the following DNS settings

ISP, select Apply

addresses given to you by the ISP, select Apply Go to Router > Static, select Create New, enter the default gateway address and select

Quick Start Guide.

Select Retrieve default gateway from server and Override internal DNS op tions if your

Quick Start Guide.

Go to step 6 if you are not selecting these options. 5. 6. 7. 8. 9.

LEDStateDescription

Power

GreenThe FortiGate unit is on.

OffThe FortiGate unit is off.

Status

Green/Flashing

Green

The FortiGate unit is starting up.

OffThe FortiGate unit is running normally.

Link (Internal, DMZ,

WAN1, WAN2)

GreenThe correct cable is in use and the connected equipment has power.

Flashing GreenNetwork activity at this interface.

OffNo link established.

100
(Internal, DMZ,

WAN1, WAN2)

GreenThe interface is connected at 100Mbps.

Internet

Router

Internal

network DMZ

10.10.10.1

10.10.10.2

Internal Network192.168.1.3

Internal

192.168.1.99

Routing policies controlling

traffic between internal networks. WAN1

204.23.1.5

NAT mode policies controlling

traffic between internal and external networks.

INTERNAL

DMZ4321

LINK 100LINK 100LINK 100LINK 100LINK 100LINK 100LINK 100

WAN1WAN2PWRSTATUS

INTERNALDMZ4321

LINK 100LINK 100LINK 100LINK 100LINK 100LINK 100LINK 100

WAN1WAN2PWRSTATUS

Powerquotesdbs_dbs3.pdfusesText_6

[PDF] fortigate 60e firewall

[PDF] fortigate 60e firmware 6.2.2

[PDF] fortigate 60e firmware upgrade cli

[PDF] fortigate 60e firmware upgrade path

[PDF] fortigate 60e firmware version

[PDF] fortigate 60e forticlient license

[PDF] fortigate 60e fortiguard license

[PDF] fortigate 60e installation manual

[PDF] fortigate 60e license activation

[PDF] fortigate 60e license price

[PDF] fortigate 60e license renewal price

[PDF] fortigate 60e license utm

[PDF] fortigate 60e price in pakistan

[PDF] fortigate 60e price list

[PDF] fortigate 60e price malaysia