[PDF] NIH Grants – Document Setup Guidelines General Setup Full

View - Download NIH Grants – Document Setup Guidelines General Setup Full

Previous PDF

Next PDF

NIH Grants - Document Setup Guidelines

Adapted

by FSM/Basic Science Administration

Last Updated: March 15, 2021 Page 1 of 2

General Setup

Full guidance: https://grants.nih.gov/grants/how-to-apply-application-guide/format-and-write/format-attachments.htm

NIH requires documents to use:

A paper size no larger than standard letter paper size (8 ½" x 11") at least one-half inch margins (½" ) - top, bottom, left, and right - for all pages

Line Spacing

NIH requires that documents contain no more than six lines per vertical inch. To ensure there are no

more than 6 lines per inch, you can set line spacing in the document to "exactly 12 pt." This can be done

in the paragraph settings panel in Word's layout tab:

This works by setting each line in the document to take up 12 points of space. In typography settings

there are 72 points per inch, so this sets the document to allow only 6 lines per inch. Once you've done

that, you can double check the number of lines on a page by using the line numbers feature in Word and

set the display count to "restart each page." This will display a line count per page in the far left margin

of the document. If everything is set correctly, you should find no more than 60 lines of text on each

page per 8.5"x11" page with 0.5" margins.

NIH Grants - Document Setup Guidelines

Adapted

by FSM/Basic Science Administration

Last Updated: March 15, 2021 Page 2 of 2

Font Size / Type Density

NIH requires the use of a font that is at least 11 pt in size and generally recommends the use of either

Arial, Georgia, Helvetica, or Palatino Linotype. However, they also go on to state that there must be no

more than 15 characters per linear inch (including characters and spaces). On an 8.5"x11" page with 0.5"

margins, this would mean a maximum of 112 characters per line. We have found that in practice Arial 11 pt font, which most investigators use, does not always conform to the 15 characters per linear inch guidance. We have found that it most often seems to not conform

when the document is set to use the justified alignment paragraph settings. That setting will sometimes

contract text to the point where there are 120 characters or more per line. With the other investigators who have experienced scrutiny from CSR, we found moving to Georgia font in 11.5 pt size made sure that the character count per line, including spaces, stayed just under 112 characters. If you prefer to continue using Arial 11 as your font, we then recommend you update the advanced settings in font panel on Word"s home tab to the following:

The expanded spacing set to 0.2 pt allows for slightly more room between each character without being

visually disruptive to the reader. This slight expansion seems to be enough to ensure that the character

count per line, including spaces, stays just under 112 characters.quotesdbs_dbs6.pdfusesText_12

[PDF] what happens when the tcp retransmission timeout is too long?

[PDF] what have you learned from the iterative process?

[PDF] what hemisphere is new york city in

[PDF] what important steps toward democracy were taken by england and france between the 800s and 1200s

[PDF] what industry initially boomed with the introduction to robotics in the workplace?

[PDF] what is a fedex control number

[PDF] what is a fitbit watch

[PDF] what is a province

[PDF] what is a research problem pdf

[PDF] what is an attest client

[PDF] what is an event what are the various sources of events

[PDF] what is asia miles

[PDF] what is backend

[PDF] what is brix level

[PDF] what is business report and its types