[PDF] Opening a Beauty Salon or Skin Penetration Premises Is

View - Download Opening a Beauty Salon or Skin Penetration Premises Is

Previous PDF

Next PDF

Opening a Beauty Salon or Skin Penetration Premises Fact Sheet 1 Opening a Beauty Salon or Skin Penetration Premises This guideline provides information for persons wanting to open a hair, beauty salon, or skin penetration business in either a commercial or home business setting. All beauty salons and other premises where skin penetration activities will be carried out have a legal obligation to notify Council and are routinely inspected ensure their compliance with the Local Government (General) Regulation 2021 and/or the Public Health

Act 201

and Public Health Regulation 2012.

You can notify Council by completing a

Public Health Registration Form and forwarding to mail@hilltops.nsw.gov.au or dropping it to your nearest office.

Is Development Consent required?

Development consent is required for any new business premise s or sometimes when there are alterations to an existing one. Beauty salons cannot be carried out as exempt development under State Environmental Planning Policy (Exempt and Complying Development Codes) 2008. This means a Development Application (DA) needs to be lodged

with Council via the Planning Portal. If your beauty salon will be providing beauty treatments involving skin penetration (e.g.

waxing , piercing, tattooing, cuticle cutting, any other procedure where the skin may be penetrated or removed, or any other procedure prescribed by the regulation such as colonic lavag e) then additional construction standards will apply (See below section: General

Construction Standards).

Submission Requirements

For Council to assess the proposal, a Development Application together with the applicable fees and the following information is required to be lodged at the

Planning Portal Platform. 1. A simple site plan showing all existing and/or proposed buildings, signage and client/staff access and parking arrangements is required in addition to other standard plans and

documentation for a DA. If signage is proposed, a basic dimensioned signage plan should be provided. A floor plan (at a suitable scale i.e., 1:100 or 1:200) showing the location of the equipment washing sink, the hand wa shbasin (separate to the equipment washing sink), and existing or proposed fire safety measures (smoke alarms, emergency lighting, required exits etc.) will also be required as part of a DA. The floor plan must show the proposed lay out and fit out of internal rooms, partition walls for beauty rooms, treatment tables, etc. A basic operational statement addressing the following matters: Any liquid/ chemical/ trade waste storage and disposal,

Expected water demand/usage by the beauty salon,

c. Safe storage and disposal of contaminated wastes, Proposed sterilisation and disinfection regime for equipment and processes (if skin penetration procedures are not being done a benchtop steriliser will not be required

All reusable equipment must be cleaned

and disinfected prior to each use, and details Opening a Beauty Salon or Skin Penetration Premises Fact Sheet 2 of the cleaning and disinfection regime should be clearly documented in the operational statement Procedures and practices that will be performed within the premises, Relevant construction standards and health requirements below under the Local

Government Act 1993

and Public Health Act 2010, and

Any other likely impacts of the development proposal (hours of operation, noise, waste management etc.).

Elevations showing the external height and configuration of any signage. Please ensure you indicate dimensions, natural ground level and material/colour. A Statement of Environmental Effects (SEE) - minimum requirements: Describe the proposal, its design, the site, and parameters Document how the proposal responds to the sites surrounds and environment,

c. Identify any environmental impacts of the proposed development and explain the likelihood of impacts of the development proposal both during and after any

construction and how these impacts will be minimised.

General Construction Standards

WALLS - The internal walls of the premises must be constructed to provide a smooth, even, and impervious surface that is capable of being easily cleaned. FLOOR - The floor construction must be finished in a smooth, non-slip, impervious material that is capable of being easily cleaned. GAPS/JOINTS - All gaps, open joints, cracks and crevices within the walls and floors which may allow dust, hair, lint, and other debris to collect must be effectively sealed to enable easy cleaning. PENETRATIONS - All service pipes and electrical conduits must be contained in thequotesdbs_dbs7.pdfusesText_5

[PDF] la vérité sur les cosmétiques inci

[PDF] convention de stage decouverte professionnelle

[PDF] convention de stage d'observation 3ème

[PDF] mesure de longueur ce1 evaluation

[PDF] windows 8 pour les nuls pdf

[PDF] tutoriel windows 8.1 pdf

[PDF] cours windows 8 gratuit pdf

[PDF] cours de windows 10 pdf

[PDF] initiation windows 8 pdf

[PDF] détente horizontale sans élan

[PDF] evaluer ses compétences professionnelles en ligne

[PDF] identifier ses atouts et dégager des idées de projet professionnel

[PDF] identifier ses compétences

[PDF] atouts professionnels exemple

[PDF] analyse des compétences professionnelles