[PDF] Prüfprozesseignung nach VDA 5 und ISO 22514-7 - ReadingSample





Previous PDF Next PDF



INTERNATIONAL STANDARD ISO 22514-1

01/06/2014 Note 1 to entry: In ISO 9000:2005 3.1.1



INTERNATIONAL STANDARD ISO 22514-6

15/02/2013 ISO 22514-1 Statistical methods in process management — Capability and performance — Part 1: General principles and concepts. ISO 22514-2 ...



INTERNATIONAL STANDARD ISO 22514-1

Note 3 to entry: For a non-normal distribution the reference interval can be estimated using the method described in ISO/TR 22514-4. Note 4 to entry: The term 



Standard ISO 22514-2

ISO 3534-2 and ISO 22514-1 and the symbols and abbreviated terms given below



INTERNATIONAL STANDARD ISO 22514-4

01/08/2016 The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives Part 1.



ISO 22514-1:2009

01/10/2009 NOTE 2 Adapté de l'ISO 3534-2:2006 définition 3.1.5. iTeh STANDARD PREVIEW. (standards.iteh.ai). ISO 22514-1:2009 https:// ...



INTERNATIONAL STANDARD ISO 22514-8

01/06/2014 described in the ISO/IEC Directives Part 1. In particular the ... ISO 22514-3



INTERNATIONAL STANDARD ISO 22514-5

A list of all parts in the ISO 22514 series can be found on the ISO website. ISO 7870-1 for further information). Capability of attribute characteristics ...



Study of measurement process capability with non-normal data

In Section 2.1 of the present paper ISO 22514-1 is analyzed [8]. This standard illustrates the main concepts concerning the capability and performance of 



Statistical methods in process management — Capability and

NOTE 2. This part of ISO 22514 is primarily developed to be used for simple one-dimensional measurement processes where it is known that the method uncertainty 



INTERNATIONAL STANDARD ISO 22514-1

Partie 1: Principes et concepts généraux. STANDARD. ISO. 22514-1. Second edition. 2014-06-01. Reference number. ISO 22514-1:2014(E).



Aus (DIN) ISO 21747 wird (DIN) ISO 22514-1 und -2 – welche

In PIQ® 1/2013 hatten wir einen Überblick über Inhalte und Stand der Normenreihe ISO 22514 gegeben. Die. Entwicklung ist inzwischen vorangeschritten.



Heft Nr. 9 Maschinen- und Prozessfähigkeit

6 Apr 2020 in vorhersagbarer Weise ändern. Dies kann z. B. mittels statistischer Prozessregelung erfolgen [Heft. 7]. 1 In Anlehnung an [ISO 22514-1; 1].



Bosch Global

6 Apr 2020 ways changing. This can be followed up e. g. with statistical process control [Booklet 7]. 1 Based on [ISO 22514-1; 1]. 2020-04-06 - SOCOS.



ISO 22514-1

INTERNATIONAL. STANDARD. ISO. 22514-1. First edition. 2009-10-01. Statistical methods in process management — Capability and performance —. Part 1:.



Standard ISO 22514-2

For the purposes of this document the terms and definitions given in ISO 3534-2 and ISO 22514-1



INTERNATIONAL STANDARD ISO 22514-3

ISO 2020. STANDARD. ISO. 22514-3. Second edition. 2020-12. Reference number. ISO 22514-3:2020(E). iTeh STANDARD PREVIEW. (standards.iteh.ai).



Prüfprozesseignung nach VDA 5 und ISO 22514-7 - ReadingSample

nach VDA 5 und ISO 22514-7. Bearbeitet von. Edgar Dietrich Michael Radeck. 1. ... 2.4.1 Standardunsicherheit nach der Ermittlungsmethode A.



INTERNATIONAL STANDARD ISO 22514-7

ISO. 22514-7. Second edition. 2021-08. Reference number. ISO 22514-7:2021(E) 1. iTeh STANDARD PREVIEW. (standards.iteh.ai). ISO 22514-7:2021.



INTERNATIONAL STANDARD ISO 22514-6

15 Feb 2013 ISO 22514-1 Statistical methods in process management — Capability and performance — Part 1: General principles and concepts.



Statistical methods in process management — Capability and

ISO 22514-7:2021(E) Introduction The purpose of a measurement process is to produce measurement results obtained from defined characteristics on parts or processes The capability of a measurement process is derived from the statistical properties of measurements from a measurement process that is operating in a predictable manner



Statistical methods in process management — Capability and performa

ISO 22514-2:2017(E) Introduction Many standards have been created concerning the quality capability/performance of processes by international regional and national standardization bodies and also by industry All of them assume that the process is in a state of statistical control with stationary normally distributed processes



INTERNATIONAL ISO STANDARD 22514-1 - InterPlanetary File System

ISO 22514-1:2009(E) PDF disclaimer This PDF file may contain embedded typefaces In accordance with Adobe's licensing policy this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing



Statistical methods in process management — Capability and

ISO 22514 consists of the following parts under the general title Statistical methods in process management — Capability and performance: — Part 1: General principles and concepts — Part 2: Process capability and performance of time-dependent process models — Part 3: Machine performance studies for measured data on discrete parts



Statistical methods in process management — Capability and

ISO22514 consists of the following parts under the general title Statistical methods in process management — Capability and performance: — Part 1: General principles and concepts — Part 2: Process capability and performance of time-dependent process models — Part 3: Machine performance studies for measured data on discrete parts



Statistical methods in process management — Capability and

ISO 22514-3:2020(E) Introduction This document has been prepared to provide guidance in circumstances where a study is necessary to determine if the output from a machine for example is acceptable according to some criteria Such circumstances are common in engineering when the purpose for the study is part of an acceptance trial



Statistical methods in process management — Capability and

ISO 22514 consists of the following parts under the general title Statistical methods in process management — Capability and performance: — Part 1: General principles and concepts — Part 2: Process capability and performance of time-dependent process models — Part 3: Machine performance studies for measured data on discrete parts



INTERNATIONAL ISO STANDARD 22514-6

ISO 22514 consists of the following parts under the general title Statistical methods in process management — Capability and performance: — Part 1: General principles and concepts — Part 2: Process capability and performance of time-dependent process models — Part 3: Machine performance studies for measured data on discrete parts



INTERNATIONAL ISO STANDARD 22514-5 - iTeh Standards Store

ISO 22514-5:2019(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies) The work of preparing International Standards is normally carried out through ISO technical committees



Statistical methods in process management — Capability and

ISO 22514 consists of the following parts under the general title Statistical methods in process management — Capability and performance: — Part 1: General principles and concepts — Part 2: Process capability and performance of time-dependent process models — Part 3: Machine performance studies for measured data on discrete parts



Quality Management in the Bosch Group Technical Statistics

1Based on [ISO 22514-1; 1] Booklet No 9 ?Machine and Process Capability © Robert Bosch GmbH 2019 11 2019 6 The steps are treated in this booklet from the viewpoints of machine capability as well as short and long-term capability and performance of manufacturing processes The booklet is divided into the main part and the appendix



Searches related to iso 22514 1 filetype:pdf

ISO 22514-7 Measurement Process Capability It is always the own guideline that is relevant to each company at first If such a guideline does not exist supe-rior standards of technical associations or general stan-dards will be used in audits You may divide company guidelines in two categories Some guidelines are based

What is the first edition of ISO 22514-4?

  • This first edition of ISO 22514-4 cancels and replaces ISO/TR 22514-4:2007, which has been technically revised. ISO22514 consists of the following parts, under the general title Statistical methods in process management — Capability and performance: — Part 1: General principles and concepts

What are the parts of iso22514?

  • ISO22514 consists of the following parts, under the general title Statistical methods in process management — Capability and performance: — Part 1: General principles and concepts — Part 2: Process capability and performance of time-dependent process models — Part 3: Machine performance studies for measured data on discrete parts

What is the difference between capability and performance in ISO 22514?

  • The most fundamental shift has been to philosophically separate what is named in this part of ISO 22514 as capability conditions from performance conditions, the primary difference being whether statistical stability has been obtained (capability) or not (performance).

What is the distribution of the product characteristic in ISO 22514?

  • NOTE 5 In this part of ISO 22514, the distribution of the product characteristic will be considered under different but well-defined conditions, such as performance and capability, where performance is the least restrictive. 2.1.24 class of distributions

Prüfprozesseignung

nach VDA 5 und ISO

22514-

7Bearbeitet

vonEdgar

Dietrich,

Michael

Radeck1.

Auflage

2014.
Buch. 128

S.ISBN

978
3 446
44332

7Format

(B x L): 10,8 x 16,7 cmGewicht: 109
gWeitere

Fachgebiete

Technik

Produktionstechnik

Industrielle

und portofrei bei Die

Online-

Fachbuchhandlung

beck- shop.de ist spezialisiert auf

Fachbücher,

insbesondere

Recht,

Steuern

und

Wirtschaft.Im

Sortiment

finden Sie alle

Medien

(Bücher,

Zeitschriften,

CDs, eBooks, etc.) aller

Verlage.

wird das

Programmdurch

Services

wie

Neuerscheinungsdienst

oder

Zusammenstellungen

von

Büchern

zu

Sonderpreisen.

Der Shop führt mehrals 8

Millionen

Produkte.

Begriffe

4

Inhaltsverzeichnis

1 Begriffe ........................................................................ 6

2 Ermittlungsmethoden für Standardunsicherheiten

.............................. 14

2.2 Auswahl eines Messsystems .................................................. 16

2.3 Betrachtung des Messsystems und des Messprozesses

.......................................................................................................... 16

2.4 Ermittlungsmethoden für Standardunsicherheiten ..... 16

2.4.1 Standardunsicherheit nach der Ermittlungsmethode A

(Auswerten eines Versuchs) ................................................... 18

2.4.2 Standardunsicherheit nach der Ermittlungsmethode B (Bekannte Werte) ....................................................................... 18

2.4.3 Zusammenfassung der Ermittlungsmethoden .............. 20

2.5 Kombinierte Standardunsicherheit ..................................... 22

2.6 Erweiterte Messunsicherheit ................................................. 24

3 Ablauf des Eignungsnachweises ............................. 26

3.1 Nachweis der Messsystemeignung (Q

MS ) .......................... 28

3.2 Minimal prüfbare Toleranz des Messsystems .................. 28

3.3 Nachweis der Messprozesseignung (Q

MP ) ......................... 30

3.4 Minimal prüfbare Toleranz des Messprozesses .............. 30

3.5 Berücksichtigung der Messunsicherheit

(Toleranzanpassung) ................................................................ 32

4 Analyse eines Messsystems ..................................... 34

4.1 Ablauf zur Ermittlung der Messsystemeignung ............. 36

Begriffe

5

4.1.2 Messsystemeignung aus bekannter

Abweichungsgrenze ................................................................. 42 Lin

.......................................................................................................... 48

4.1.4 Standardunsicherheiten aus mehrfacher Durchführung des Verfahrens 1 ......................................................................... 54

5 Analyse des Messprozesses ..................................... 72

5.1.1 Standardunsicherheiten aus einem Verfahren 2 ............ 74

5.1.2 Standardunsicherheit der Temperatur u

T ......................... 78

5.1.3 Standardunsicherheit des Prüfobjektes u

OBJ ..................... 82

5.1.4 Standardunsicherheit verschiedener Vorrichtungen u

GA

.......................................................................................................... 90

STAB ........................... 90

5.1.7 Weitere Standardunsicherheiten ......................................... 94

5.2 Ablauf zur Ermittlung der Messprozesseignung ............ 94

5.2.1 Kombinierte Standardunsicherheit des Messprozesses .......................................................................................................... 94

5.2.2 Erweiterte Messunsicherheit des Messprozesses ........ 100

6 Anhang .................................................................... 114

6.2 Formeln zur einfachen balancierten Varianzanalyse für

eine Zufallskomponente A ................................................... 118

6.3 Literatur ....................................................................................... 124

6.4 Abkürzungen ............................................................................. 126

Begriffe

3

Vorwort zur 1. Auflage

Mit dem VDA Band 5 OEPrüfprozesseignung [14] und der Norm ISO 22514-7 [12] wurde die Brücke gebaut, wel- che die pragmatisch orientierten Verfahren der Messsys- temanalyse, wie diese in der MSA [1] Measurement Systems Analysis beschrieben ist, mit dem Konzept der Ermittlung eines Unsicherheitsbudgets nach GUM [9] verbindet: So lassen sich Ergebnisse aus den bekannten Messsystemanaly- sen Verfahren 1 und 2 einfach in eine Unsicherheitsstudie übernehmen. Auch wurden die Tugenden der Messsystem- analyse-Verfahren übernommen:

Versuchen ermittelt

Entscheidungsregeln für die Annahme oder Rück- weisung eines Messprozesses. Insgesamt ist die Prüfprozesseignung im Sinne des VDA

5 bzw. ISO 22514-7 eine gelungene OEÜbersetzung des

dieses Büchlein Ihnen helfen, einen leichten Zugang zu dem

Thema zu finden.

Weinheim, August 2014 Edgar Dietrich

Michael Radeck

Ablauf des Eignungsnachweises

26

3 Ablauf des Eignungsnachweises

Auf der Grundlage der erweiterten Messunsicherheit Insgesamt ergeben sich aus den Analyse-Ergebnissen drei

Anwendungen:

1) Nachweis der Messsystemeignung (Q

MS

2) Nachweis der Messprozesseignung (Q

MP

3) Berücksichtigung der Messunsicherheit (Toleranz-

anpassung)

Das Schema zur Beurteilung der

Standardunsicherheiten u(x

A ), u(x B

Erweiterte Messunsicherheit U

MS , U MP

Eignungskennwerte Q

MS , Q MP

Minimale Toleranz T

MIN-UMS

, T

MIN-UMP

ist in Abb. 3-1 dargestellt.

Ablauf des Eignungsnachweises

27
Abb. 3-1: Grobschema der Messunsicherheitsbestimmung

Ablauf des Eignungsnachweises

28

3.1 Nachweis der Messsystemeignung (Q

MS Für die Beurteilung, ob das Messsystem für die Anwen- MS berechnet.

MS_max

= 15 % (Empfehlung) verglichen. In Worten: Ist das Ergebnis für den Eignungskennwert Q MS als 15 %, so sind Verbesserungen am Messsystem durchzu- Das Eignungsnachweisverfahren muss nach der Verbesse- rungsmaßnahme bzw. nach der Auswahl eines anderen

Messsystems erneut durchgeführt werden.

3.2 Minimal prüfbare Toleranz des Mess-systems

Setzt man in die Berechnungsformel für den Eignungs- kennwert Q MS

MS_max

= 15 % man die m minimal prüfbare Toleranz des Messsystems TOL

MIN_UMS

Hat das Messsystem die Anforderung bezüglich Q

MS er- füllt, so wird die zweite Abnahmestufe begonnen, also die Betrachtung auf den gesamten Messprozess ausgeweitet.

Ablauf des Eignungsnachweises

29
Abb. 3-2: Schema für den Eignungsnachweis des Messsystems

Ablauf des Eignungsnachweises

30

3.3 Nachweis der Messprozesseignung (Q

MP Das Ermittlungsschema ist analog zu demjenigen der Messsystemeignung. Mit der erweiterten Messunsicherheit des Messprozesses U MP und der Toleranz des zu messenden Merkmals TOL berechnet man den Eignungskennwert des

Messprozesses Q

MP

Die Anforderung an den Messprozess lautet:

Q MP

MP_max

= 30 % In Worten: Ist das Ergebnis für den Eignungskennwert des Messprozesses Q MP so sind die Anforderungen erfüllt. Ist jedoch der Eignungs- kennwert Q MP nicht erfüllt und der Messprozess muss verbessert werden. Hierbei sollte man das Pareto-Prinzip berücksichtigen: Bei der Verbesserung bemühe man sich um das Reduzieren der

3.4 Minimal prüfbare Toleranz des Mess-prozesses

Setzt man in die Formel den empfohlenen Grenzwert

Q

MP_max

ein und stellt die Formel nach der Toleranz um, so minimal prüfbare Toleranz des Messpro- zesses TOL

MIN_UMP

Hinweis: Die minimal prüfbare Toleranz des Messpro- zesses TOL

MIN_QMP

ist eine hilfreiche Informationsquelle bei der Auswahl eines Messprozesses für ein neues Produkt(- merkmal).

Ablauf des Eignungsnachweises

31
Abb. 3-3: Schema für den Eignungsnachweis des Messprozessesquotesdbs_dbs14.pdfusesText_20
[PDF] iso 22870

[PDF] iso 25000

[PDF] iso 25000 pdf

[PDF] iso 25000 pdf francais

[PDF] iso 25000 square

[PDF] iso 25000 wikipedia

[PDF] iso 25010

[PDF] iso 26000 7 principes

[PDF] iso 26000 définition

[PDF] iso 26000 environnement

[PDF] iso 26000 pdf

[PDF] iso 26000 rse

[PDF] iso 26001

[PDF] iso 27018

[PDF] iso 31