[PDF] cisco router>enable password recovery

Password Recovery for Cisco Routers
  1. Turn off or shut down the router.
  2. Take out the Compact flash of the router (this step will ensure that the router boots into rommon mode which is where we can bypass the current config file)
  3. Turn on the router.
  4. Reinsert the compact flash card into the router.
View PDF Document


  • How to do password recovery on cisco router?

    # enable password - it will enables a password that based on a clear text, unlike, # enable secret - it will enables a password and password encryption that based on the md5 hashing algorithm.
    This is is a most recommended command to supply while enabling a password to any cisco network devices.

  • How to recover enable password on cisco switch 2960?

    The enable password secures the privileged mode, which is required for all commands that change the router's configuration.
    Configuring the enable password therefore keeps people with general access to your router from changing the router's configuration.

View PDF Document




Replacing or Recovering a Lost Password

enable secret password on your Cisco 4000 Series Integrated Services Routers (ISRs). Note. It is possible to recover the enable or console login password.



Password Recovery in ROM Monitor Mode

recover the password at the RSP card set the configuration register to 0x142 on the active RSP and reboot the router. When the router boots



Troubleshoot Password Recovery in Cisco IOS®/IOS®-XE Routers

13 Apr 2021 This steps can be used to recover username and password credentials as well as enable password. In base on the current device configuration



Password Recovery Procedure for the Cisco 2000 2500

https://community.cisco.com/kxiwq67737/attachments/kxiwq67737/5981-discussions-other-network-infra/198560/1/71567-pswdrec_2500.pdf



Chapter 5-Replacing or Recovering Passwords

This section describes how to recover a lost enable or console login password and how to replace a lost enable secret password on the Cisco uBR10012 router 



Password Recovery in ROM Monitor Mode

To recover the password at the. Designated Shelf Controller (DSC) set the configuration register to 0x142 on the active RP and reboot the router.



Password Recovery in ROM Monitor Mode

To recover the password at the. Designated Shelf Controller (DSC) set the configuration register to 0x142 on the active RP and reboot the router.



New Password Recovery Procedure on Cisco 8000 and NCS5500

In the router configuration a new command system recovery is created for the purpose of enabling the new password recovery feature. This is currently an 



Password Recovery in ROM Monitor Mode

ROM Monitor Configuration Guide for Cisco ASR 9000 Series Routers IOS XR Release 5.2.x -Password Recovery in ROM Monitor Mode.



Password Recovery in ROM Monitor Mode

Cisco IOS XR ROM Monitor Configuration Guide for the Cisco CRS Router Release 5.1.x -Password Recovery in ROM Monitor Mode.