External Control Panel (ECP) for FDU and VFB/VFX

Emotron VFX 2.0 AC drive

Emotron FDU/VFX 2.0. External Control Panel instruction manual / 01-. 5928-01. Control panel kit

Emotron VFX 2.0 AC drive

Emotron FDU/VFX 2.0. External Control Panel instruction manual / 01-. 5928-01. Control panel kit

Emotron VFX 2.0 Variable Speed Drive

9 ??? 2015 ?. Emotron VFX 2.0 and FDU 2.0 Variable Speed Drive. New Software version 4.21 ... do not touch the control board when the variable speed.

Emotron VFX 2.0 AC drive

Emotron FDU/VFX 2.0. External Control Panel instruction manual / 01-. 5928-01. Control panel kit

Emotron VFX 2.0 Variable Speed Drive

NOTE: Each installation must be examined carefully before applying the proper EMC measurements. Control board. Pressure sensor. (example). External control.

Emotron VFX 2.0 AC drive

FDU. VFX. 2. Supply voltage. 48=480 V mains. 3. Rated current (A) continuous. -2P5=2.5 A. -. -032=32 A. 4. Protection class. 2Y=IP20. 5. Control panel.

Emotron VFX 2.0 AC drive

Emotron FDU/VFX 2.0. External Control Panel instruction manual / 01-. 5928-01. Control panel kit

Emotron VFX 2.0 AC drive

11 ???. 2011 ?. digital inputs or the control panel and menu [241]. Each parameter set can be selected externally via a digital.

Emotron VFX 2.0 AC drive

NOTE: Each installation must be examined carefully before applying the proper EMC measurements. Control board. Pressure sensor. (example). External control.

0. F33_Frontpage.fm

age do not touch the control board when the AC drive is Operation via the Control Panel. ... A standard 4-pole motor for 400 V

External control panel kit Option - emotroncom

External Control Panel frame kit for Emotron FDU 2 0 and VFX 2 0 type IP20/21 (Famesizes C2 to F2 VFX/FDU48-025 to 48-244) Fig 1 Control panel frame kit The frame kit contains: 1pc - mounting frame 3pcs - mounting clamps with screws 1pc - D-sub connector and ribbon cable 2pcs - mounting screws 2pcs - D-sub spacer screws 2pcs - washers 1pc - clip

External control panel - Emotron

External Control Panel for Emotron FDU 2 0 and VFX 2 0 Fig 1 Blank control panel kit Fig 2 Control panel kit Above listed kits contains: Control panel or blank panel mounting frame gland plate with D-sub connector and ribbon cable mounting clamps mounting screws spacers clips washers and RS232 cable Length of the RS232 cable = 3m Table 1

External Control Panel (ECP) for FDU and VFB/VFX - Elpro Drive

External Control Panel (ECP) for FDU and VFB/VFX Article number 01-3059-00 The ECP is mounted on a cabinet door in which holes are punched/drilled according to the drawing on the last page Inverter with mounted BCP (Blank Control Panel) • Connect the cable between the ECP and the BCP (2) Inverter with mounted control panel

[PDF] External Control Panel (ECP) for FDU and VFB/VFX - Elpro Drive