[PDF] [PDF] Building Cisco Multilayer Switched Networks (BCMSN)





Previous PDF Next PDF



Cisco MDS 9148 Multilayer Fabric Switch Quick Start Guide

A maximum of 125 buffers per port in a port group. • Fair bandwidth arbiters. • Device Manager Quick Config Wizard for the Cisco MDS 9148 Switch. • Redundant 



Multilayer Switching v1.21

Switch(config-if)# no switchport. Switch(config-if)# ip address 10.101.101.1 255.255.255.0. Multilayer switches support configuring a VLAN as a logical 



Catalyst 3560 Switch Software Configuration Guide Cisco IOS

Catalyst 3560 Switch Software Configuration Guide Cisco IOS Release CLI—The Cisco IOS software supports desktop- and multilayer-switching features.



Configuring Layer 3 Interfaces - Catalyst 4500 Series Switch Cisco

The physical Layer 3 interfaces allow the. Catalyst 4500 series switch to be configured like a traditional router. Page 2. 23-2. Software Configuration Guide— 



Catalyst 3550 Multilayer Switch Software Configuration Guide

Catalyst 3550 Multilayer Switch Software Configuration Guide. Copyright © 2004 Cisco Systems Inc. All rights reserved.



CISCO CATALYST 2960 SERIES SWITCHES

1 rack unit (RU) fixed-configuration multilayer switch. • Entry-level enterprise-class intelligent services. • LAN Base Image installed. WS-C2960-48TT-L.



Configuration Guide of Layer3 Managed Switch

User's Manual of PLANET 24-Port Gigabit Layer 3 Stackable Managed Switch with 4 10G Slots 4.3.1 Switch IP Addresses Configuration Task List .



Cisco MDS 9148S Multilayer Switch Hardware Installation Guide

Cisco MDS 9000 Family Switch-to-Switch Interoperability Configuration Guide. • Cisco MDS NX-OS Release Compatibility Matrix for IBM SAN Volume Controller 



Catalyst 3550 Switch Command Reference (full book in PDF format)

Catalyst 3550 Multilayer Switch Command Reference. OL-8566-01 mvr (global configuration) 2-256 mvr (interface configuration) 2-259 pagp learn-method 2-262.



Release Notes for the Catalyst 3550 Multilayer Switch Cisco IOS

is a Catalyst 3550 Gigabit Ethernet switch and the standby command switch is a Catalyst 3550 Fast Multilayer Switch Software Configuration Guide).



Configuring IP Multilayer Switching [Support] - Cisco Systems

The commands and configurations described in this guide apply only to the devices that provide routing services Commands and configurations for Catalyst 5000 



[PDF] Configuring Layer 3 Interfaces - Cisco

The physical Layer 3 interfaces allow the Catalyst 4500 series switch to be configured like a traditional router Page 2 23-2 Software Configuration Guide— 



[PDF] Catalyst 3550 Multilayer Switch Software Configuration Guide

Catalyst 3550 Multilayer Switch Software Configuration Guide Copyright © 2004 Cisco Systems Inc All rights reserved



[PDF] Multilayer Switching - Router Alley

Multilayer Switching - Routing Between VLANs By default a switch will forward both broadcasts and multicasts out every port but the originating port



[PDF] Multilayer Switching Architecture on Catalyst Switches • MLS

The purpose of this chapter is to provide you with details architecture and methods of multilayer switching on Catalyst switches



Multilayer Switching MLS - Cisco PDF - Scribd

This chapter describes how to configure Multilayer Switching (MLS) on the Catalyst 5000 and 2926G series switches Note For complete syntax and usage 



[PDF] Switch Configuration Guide - GCOMGE

In layer -3 switch there is no need to configure management vlan for its interface vlan is the management vlan 4 3 QinQ Configuration 4 3 1 QINQ Overview



[PDF] Release Notes for the Catalyst 3550 Multilayer Switch Cisco IOS

For more information on setting passwords and privilege levels refer to the Catalyst 3550 Multilayer Switch Software Configuration Guide Step 3 Click Web 



[PDF] Building Cisco Multilayer Switched Networks (BCMSN)

Configuring Inter-VLAN Routing on a Multilayer Switch Describing Basic Switch Commands to Support Attachment of a Cisco IP Phone

:
Building Cisco Multilayer Switched Networks (BCMSN)

Table of Contents

Module 1

Defining VLANs

Lesson1

Implementing Best Practices for VLAN Topologies

Describing Issues in a Poorly Designed Network

Grouping Business Functions into VLANs

Describing Interconnection Technologies

Determining Equipment and Cabling Needs

Mapping VLANs in a Hierarchical Network

Lesson2

Implementing VLANs

Describing End-to-End VLANs

Describing Local VLANs

Benefits of Local VLANs in an Enterprise Campus Network

VLAN Configuration Modes

Explaining VLAN Access Ports

Describing VLAN Implementation Commands

Implementing a VLAN

Lesson3

Implementing Trunks

Explaining VLAN Trunks

Describing ISL Trunking

Describing 802.1Q Trunking

Explaining 802.1Q Native VLANs

Explaining VLAN Ranges

Configuring Trunking

Lesson4

Propagating VLAN Configurations with VTP

Explaining VTP Domains

VTP Modes

Describing VTP Pruning

Describing VTP Operation

Describing VTP Configuration Commands

Configuring a VTP Management Domain

Adding New Switches to an Existing VTP Domain

Lesson5

Correcting Common VLAN Configuration Errors

Describing Issues with 802.1Q Native VLANs

Resolving Issues with 802.1Q Native VLANs

Describing Trunk Link Problems

Resolving Trunk Link Problems

Common Problems with VTP Configuration

Best Practice for VTP Configuration

Module 2 Implementing Spanning Tree

Lesson1

Describing the STP

Describing Transparent Bridges

Identifying Traffic Loops

Explaining a Loop-Free Network

Describing the 802.1D STP

Describing the Root Bridge

Describing Port Roles

Explaining Enhancements to STP

Lesson2

Implementing RSTP

Describing the RSTP

Describing RSTP Port States

Describing RSTP Port Roles

Explaining Edge Ports

Describing RSTP Link Types

Examining the RSTP BPDU

Identifying the RSTP Proposal and Agreement Process

Identifying the RSTP TCN Process

Describing PVRST Implementation Commands

Implementing PVRST Commands

Lesson3

Implementing MSTP

Explaining MSTP

Describing MST Regions

Describing the Extended System ID

Interacting Between MST Regions and 802.1Q

Describing MSTP Implementation Commands

Configuring and Verifying MSTP

Lesson4

Configuring Link Aggregation with EtherChannel

Describing EtherChannel

Describing the PAgP and LACP Protocols

Describing EtherChannel Configuration

Configuring Port Channels Using EtherChannel

Configuring Load Balancing over EtherChannel

Module 3

Implementing Inter-VLAN Routing

Lesson1

Describing Routing Between VLANs

Inter-VLAN Routing Using an External Router

Describing Inter-VLAN Routing Using External Router

Configuration Commands

Configuring Inter-VLAN Routing Using an External Router

Explaining Multilayer Switching

Frame Rewrite

TCAM Table

Lesson2

Enabling Routing Between VLANs on a Multilayer Switch

Describing Layer 3 SVI

Describing Config. Comm. for Inter-VLAN Communication on a Multilayer Switch Configuring Inter-VLAN Routing on a Multilayer Switch Describing Commands for Routed Ports on a Multilayer Switch

Describing Routed Ports on a Multilayer Switch

Configuring Routed Ports on a Multilayer Switch

Lesson3

Deploying CEF-Based Multilayer Switching

Explaining Layer 3 Switch Processing

Explaining CEF-Based Multilayer Switches

Identifying the Multilayer Switch Packet Forwarding Process

Describing CEF Configuration Commands

Enabling CEF-Based MLS

Describing Common CEF Problems and Solutions

Describing CEF Troubleshooting Commands

Troubleshooting Layer 3 CEF-Based MLS

Module 4

Implementing High Availability in a Campus Environment

Lesson1

Configuring Layer 3 Redundancy with HSRP

Describing Routing Issues

Identifying the Router Redundancy Process

Describing HSRP

Identifying HSRP Operations

Describing HSRP States

Describing HSRP Configuration Commands

Enabling HSRP

Lesson2

Optimizing HSRP

Describing HSRP Optimization Options

Hello Message Timers

HSRP Interface Tracking

Tuning HSRP Operations

Describing Load Sharing

Describing HSRP Debug Commands

Debugging HSRP Operations

Lesson3

Configuring Layer 3 Redundancy with VRRP and GLBP

Describing VRRP

Identifying the VRRP Operations Process

Configuring VRRP

Describing the GLBP

Identifying the GLBP Operations Process

Module 5

Wireless LANs

Lesson1

Introducing WLANs

Wireless Data Technologies

Wireless LANs

WLANs and Other Wireless Technologies

WLANS and LANs

Lesson2

Describing WLAN Topologies

WLAN Topologies

Typical WLAN Topologies

Roaming Through Wireless Cells

Wireless VLAN Support

Wireless Mesh Networking

Lesson3

Explaining WLAN Technology and Standards

Unlicensed Frequency Bands

WLAN Regulation and Standardization

IEEE 802.11b Standard

IEEE 802.11a Standard

IEEE 802.11g Standard

802.11 Comparison

General Office WLAN Design

WLAN Security

Lesson4

Access Point Basic Configuration

Autonomous Access Point Configuration

Role of Autonomous Access Points in a Radio Network Autonomous Access Point Configuration via the Web Browser

Lightweight WLAN Controller Configuration

Module 6

Configuring Campus Switches to Support Voice

Lesson1

Planning for Implementation of Voice in a Campus Network

Explaining Converged Network Benefits

Describing VoIP Network Components

Explaining Traffic Characteristics of Voice and Data

Describing VoIP Call Flow

Explaining Auxiliary VLANs

Describing QoS

Explaining the Importance of High Availability for VoIP

Explaining Power Requirements in Support of VoIP

Lesson2

Accommodating Voice Traffic on Campus Switches

QoS and Voice Traffic in the Campus Model

LAN-Based Classification and Marking

Describing QoS Trust Boundaries

Configuring a Switch for Attachment of a Cisco IP Phone Describing Basic Switch Commands to Support Attachment of a Cisco IP Phone

What Is Cisco AutoQoS VoIP?

Configuring Cisco AutoQoS VoIP on a Cisco Catalyst Switch

Module 7

Minimizing Service Loss and Data Theft in a Campus Network

Lesson1

Understanding Switch Securoty Issues

Overview of switch Security

Describing Unauthorized Access by Rogue Devices

Switch Attack Categories

Describing a MAC Flooding Attack

Describing Port Security

Configuring Port Security on a Switch

Port Security with Sticky MAC Addresses

Authentication, Authorization, and Accounting

Authentication and Authorization Methods

802.1x Port-Based Authentication

Lesson2

Protecting Against VLAN Attacks

Explaining VLAN Hopping

Mitigating VLAN Hopping

VLAN Access Control Lists

quotesdbs_dbs19.pdfusesText_25
[PDF] multilevel feedback queue implementation

[PDF] multilevel feedback queue scheduling tutorialspoint

[PDF] multilevel feedback queue scheduling code in java

[PDF] multilevel feedback queue scheduling program in c++

[PDF] multilevel inverter block diagram

[PDF] multilevel inverter ppt

[PDF] multilevel inverter project report

[PDF] multilevel inverter switching pattern

[PDF] multilevel inverter thesis

[PDF] multilevel inverters syllabus

[PDF] multilevel queue scheduling

[PDF] multimedia powerpoint presentation examples

[PDF] multimedia presentation software examples

[PDF] multimedia presentations

[PDF] multinational company profile pdf