[PDF] USG Structural Panel Concrete Subfloors Mezzanine Sell Sheet

USG Structural Panel Concrete Subfloor.xlsx

This PER Number & Pei ES Logo. Acceptable Evaluation Marks. PER-13067. Page 2 of 10. 2. When cutting USG Structural Panel Concrete Subfloor safety glasses 

USG Structural Panel Panelized System Application Sell Sheet

See Table 5 in the Progressive Engineering Inc. Product Evaluation Report PER-13067 (www.per13067.com) for complete and up-to-date simple beam floor diaphragm 

ICC PEI Report PER-13067 is now published under ICC-ES Report

ICC PEI Report PER-13067 is now published under ICC-ES Report ESR-1792 and. ICC-ES Listing Report ESL-1421. https://icc-es.org/report-listing/esr-1792/.

Executive Order 13067—Blocking Sudanese Government Property

3 Nov 1997 Executive Order 13067—Blocking. Sudanese Government Property and ... the United States or by a United States per-.

USG Structural Panel Concrete Subfloor - Submittal Sheet

General Fastener Notes: In accordance with PER-13067 the minimum screw pattern is 6 in. (153 mm) o.c. along the perimeter of the panels and 12 in.

USG STRUCTO-CRETE® Structural Concrete Panel Submittal

PER-13067 metal framing systems must be a minimum 43 mil (18 gauge) and spaced no greater than 24 in (610 mm) o.c. For steel framing

USG Structural Panel Concrete Subfloors Mezzanine Sell Sheet

General Note: In accordance with PER-13067 for Subfloor the minimum screw pattern is 6 in. (153 mm) o.c. along the perimeter of the panels and 12 in.

CGC Structural Panel Concrete Subfloor Data Sheet (English) SCP3

Note: In accordance with PER-13067 the minimum screw pattern is 6" (153mm) o.c. along the perimeter of the panels and 12".

Ratios rather than concentrations of nutritionally important elements

9 Jun 2021 DOI: 10.1111/een.13067. SHORT COMMUNICATION ... total visitations per hour per 40 bees) as mentioned earlier. For a 'whole-day' data set

PGC-1? (H-300): sc-13067

PGC-1? (H-300): sc-13067 1:100-1:1000) immunoprecipitation [1-2 µg per 100-500 µg of total protein. (1 ml of cell lysate)]

USG STRUCTURAL PANEL CONCRETE SUBFLOOR

USG STRUCTURAL PANEL CONCRETE SUBFLOOR

ICC PEI Report PER-13067 is now published under ICC-ES Report

ICC PEI Report PER-13067 is now published under ICC-ES Report ESR-1792 and ICC-ES Listing Report ESL-1421 https://icc-es org/report-listing/esr-1792/

USG STRUCTURAL PANELS

General Note: In accordance with PER-13067 for Subfloor or PER-14076 for Roof Deck the minimum screw pattern is 6 in (153 mm) o c along the perimeter of the panels and 12 in (305 mm) o c in the field of the panels Do not use a larger size screw unless specified by the structural engineer

ICC PEI LLC

PER-13067 Table 1: Physical and Mechanical Properties USG Structural Panel Concrete Subfloor Notes: Fastener Lateral Resistance measured with applicable fasteners in Table 2 Density Measured at Equilibrium Conditioning per Section 5 2 3 1-Tested 28 days after manufacturing