[PDF] DMR AXE Crank Fitment Guide - DMR Bikes PDF DMRAXEInstallationGuide.pdf

5 fév 2015 · Tools Needed: 10-40Nm 3/8'' Torque Wrench, 8mm Allen Key Praxis M30 BB tool Lay out your Crankset and BB ready for installation

Main Crank bolt = Torque 48-52nm Chainring Bolts = Torque 8-10nm • If the frame bottom bracket shell is not parallel, shifting performance will be affected and

[PDF] M24 MTB CRANK - Praxis Works

riding approximately 100 km (60 miles), use a torque wrench to re-check the tightening torques Main Crank bolt = Torque 48-55Nm Chainring Bolts = Torque

[PDF] GIRDER INSTR W:WaveW - Upgrade Bikes

Praxis Works M30 BB for BSA, M30 Conve Chainring Bolts = Torque 8-10nm retighten the crank, chain ring bolts, and pedals at periodic intervals

[PDF] M30 MTB CRANK - Alltricks

Praxis Works products are warrantied to be free from defects in materials or Main Crank bolt = Torque 48-52Nm Chainring Bolts = Torque 8-10Nm

[PDF] M30 BSA - Alltricks

Praxis Works Bottom Bracket products are warranted to be free from defects in materials or Be sure to read the instructions for your front chainrings/crank in conjunction with these With Praxis M30 tool, tighten each cup to 40Nm of torque

[PDF] QUICK START GUIDE - InfoCrank

Torque wrench with 3/8” square drive and a nominal Your InfoCrank includes a set of Praxis chainrings instructions closely to install the chainrings on

[PDF] M30 INSTR_2nc PRODUCTION - InfoCrank

CRANKSET Compatible with Praxis M30 Based cranks cranks 68mm for ROAD cranks only - 73mm for MTB cranks only FRAME SHELL BSA, BB30, PF30

[PDF] GEAR GUIDE - Indian Summer Ltd Indian Summer Ltd

chainrings, through the spider and crank then across and it's why most pro bikes use torque meters or Praxis Works has developed an excellent reputation