[PDF] [PDF] Technical Service Bulletin - NHTSA

[PDF] 2011 HyUNDAI SONATA 20T - Dealer E Process

An AM/FM/XM®/CD/MP3 sound system1 is standard on SE, while Sonata Limited features a 360-watt Dimension premium audio system with 6-disc CD changer 

[PDF] 2011 HYUNDAI SONATA - Dealer E Process

Like its larger sibling Genesis, Hyundai Sonata was built to challenge the status quo How? no matter which Sonata model you choose - GLS, SE or Limited - you'll enjoy a 1 HomeLink® is a registered trademark of Johnson Controls, Inc 2 iPod® is a or peppered with potholes, a sedan shouldn't lose its composure

[PDF] HYUNDAI SONATA 2011 - CAA-Québec

maintenant que des moteurs quatre cylindres : un 2,4 litres, un 2,0 litres turbo et un 2,4 litres offerte en quatre versions : GL, GLS, Limited, Limited Navigation

[PDF] Owners Manual - dealereprocessnet

2011 SONATA Operation 2 Why should you use genuine parts? Hyundai Genuine Parts are engi- neered and built to meet the Hyundai New Vehicle Limited Warranty or any other Don't let the engine idle longer than 3 minutes at one 

[PDF] SONATA - Dick Smith Hyundai

2AUTOMOBILE Magazine, February 2011 2013 Hyundai Sonata Review, TheCarConnection com, May 2012 SONATA 2 0T LIMITED in Camel Leather 

[PDF] Technical Service Bulletin - NHTSA

When a vehicle arrives at the Service Department, access Hyundai Motor America's "Warranty Description: Some Sonata 2 0T (YF) and Santa Fe Sport 2 0T (AN) vehicles may experience a slight leak from the 2011-14 SONATA (YF ) 2 0T

[PDF] Sonata - Hyundai

5 jan 2018 · Sonata GLS Premium Limited Navi Sport 2 0T Motor / Transmisión Motor 2 4L 2 0L Turbo No de cilindros / disposición 4 / en línea

[PDF] 2011 hyundai sonata oil type and capacity

[PDF] 2011 hyundai sonata recalls by vin number

[PDF] 2011 hyundai sonata tire size p205/65r16 (gls)

[PDF] 2011 jeep grand cherokee battery location

[PDF] 2011 jeep grand cherokee easter eggs

[PDF] 2011 jeep grand cherokee for sale

[PDF] 2011 jeep grand cherokee laredo for sale

[PDF] 2011 jeep grand cherokee limited for sale

[PDF] 2011 jeep grand cherokee overland problems

[PDF] 2011 jeep grand cherokee problems forum

[PDF] 2011 jeep grand cherokee towing capacity

[PDF] 2011 metal pistol grips

[PDF] 2011 nba draft class list

[PDF] 2011 nba draft redone

[PDF] 2011 nba draft results round 1

HYUnDR

nEWTHln mo. new POSSIBILITI

GROUP NUMBER

CAMPAIGN 16-01-071

DATE MODEL(S)

Technical Service Bulletin

DECEMBER 2016 SONATA 2.0T (YF)

SANTA

FE SPORT 2.0T (AN)

SUBJECT:

*IMPORTANT

THETA 2.0L TURBO OIL FEED HOSE REPLACEMENT

(SERVICE CAMPAIGN Tl N) *** Retail Vehicles Only *** Dealers must perform this Service Campaign whenever an affected vehicle is in the shop for any maintenance or repair. When a vehicle arrives at the Service Department, access Hyundai Motor America's "Warranty

Vehicle Information" screen via WEBDCS to identify open Campaigns. Description: Some Sonata 2.0T (YF) and Santa Fe Sport 2.0T (AN) vehicles may experience a slight

leak from the oil feed hose assembly onto the engine undercover directly beneath the hose.

This bulletin provides the service procedure to replace the oil feed hose with a revised service part. Applicable Vehicles:

• 2011-14 SONATA (YF) 2.0T • 2013-16 SANTA

FE SPORT (AN) 2.0T

Parts Information:

Part Name Part Number Comment

OIL FEED HOSE

SERVICE KIT Warranty Information:

Model

SONATA (YF) 2.0T

SANTA FE SPORT

(AN) 2.0T

28240-28411 QQH

Op Code Operation

60CA30R1 OIL FEED HOSE

60CA30R2

REPLACEMENT NOTE: Submit Claim on Campaign Claim Entry Screen.

Included Contents:

1) Oil Feed Hose (28240-28411 ): QTY 1

2) Washer Gaskets (17512-10000): QTY 2

3) Oil Feed Gasket (28246-28400): QTY 1

Op Time Causal Part Nature Cause

0.5 M/H

0.6 M/H 28240-28410 E74 ZZ1

Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service Advisors, Technicians, Body Shop Manager, Fleet Repair SUBJECT: THETA 2.0L TURBO OIL FEED HOSE REPLACEMENT (SERVICE CAMPAIGN T1 N)

Service Procedure:

Replace the Oil Feed Hose (A) according to procedure outlined in this bulletin and the applicable Shop

Manual.

• Engine mechanical-> Intake And Exhaust System-> Exhaust Manifold-> Repair Procedure I L--_j • Make sure the stopper (B) doesn't touch the compressor housing during the installation. • DO NOT reuse the gaskets. • Clean the gasket installing surfaces before the installation of the gaskets.

1. Secure the vehicle on a lift.

• Ensure that the vehicle is properly positioned on the lift. • Lifting points should not contact any exterior body parts such as the rocker panel.

2. Rotate the steering wheel fully to the left to

create more working clearance for later steps. TSB #: 16-01-071 Page 2 of 7 SUBJECT: THETA 2.0L TURBO OIL FEED HOSE REPLACEMENT (SERVICE CAMPAIGN T1 N)

3. Remove the engine top cover by firmly lifting

up at the corners.

4. Remove the (1) 10mm 02 sensor connector bracket bolt from the cylinder head and move the

bracket slightly away from the exhaust manifold.

5. Carefully remove the exhaust manifold heat

shield. • Remove the (3) 10mm exhaust heat shield bolts and set aside for reuse. • Remove the heat shield and set aside for reuse.

During removal of the heat shield,

some flexing of the part may be required. However, do not deform the heat shield by creasing or folding it.

TSB #: 16-01-071 Page 3 of 7

SUBJECT: THETA 2.0L TURBO OIL FEED HOSE REPLACEMENT (SERVICE CAMPAIGN T1 N)

6. Locate the oil feed hose connection point at

the turbocharger.

7. Remove the (1) 17mm banjo bolt and (2)

copper sealing washers. • Retain the banjo bolt for later reuse. • Discard the (2) old copper sealing washers and be sure to use (2) new copper washers during reassembly.

8. Lift the vehicle to a suitable height for under

vehicle work.

9. Remove the undercovers. (Configuration of

the undercover varies by model and model years.) • Carefully lower and set aside the undercover sections away from the work area for later reinstallation. TSB #: 16-01-071 Page 4 of 7 SUBJECT: THETA 2.0L TURBO OIL FEED HOSE REPLACEMENT (SERVICE CAMPAIGN T1 N)

10. Locate the oil feed pipe connection point at the engine block.

11. Place a shop towel under the connection

flange to capture any residual oil that may drain from the cylinder block during oil pipe disconnection.

12. Remove the (2) 10mm nuts retaining the oil

feed hose to the cylinder block. • Retain the (2) 10mm nuts for reuse.

13. Carefully remove the oil feed hose.

14. Remove and discard the old feed gasket

completely from the cylinder block. • Be sure to thoroughly clean the mating surface on the cylinder block for the new oil feed gasket.

15. Lower the vehicle.

TSB #: 16-01-071 Page 5 of 7 SUBJECT: THETA 2.0L TURBO OIL FEED HOSE REPLACEMENT (SERVICE CAMPAIGN T1 N)

16. Position the new oil feed hose to the

turbocharger and the engine block.

17. Wipe clean and install the (2) copper sealing

washers and finger tighten the banjo bolt to the turbocharger (it will be torqued later).

Copper washers must be installed

(1) above and (1) below the banjo fitting when the banjo bolt is hand threaded into the turbocharger.

18. Lift the vehicle to a suitable height for under

vehicle work.

19. Install a new feed gasket to the feed flange

mounting location on the cylinder block.

The tab on the gasket must point

down (as shown).

20. Install the oil feed hose lower connection

flange over the studs and gasket on the cylinder block. • Recheck that the tab on the gasket is pointing down. • Install the (2) 10mm nuts and tighten to

87 lb-in (1.0 kgf.m).

• Remove any shop towels previously placed under the connection flange to soak up the residual oil.

Use degreaser to clean any residual

or spilled oil.

TSB #: 16-01-071 Page 6 of 7

SUBJECT: THETA 2.0L TURBO OIL FEED HOSE REPLACEMENT (SERVICE CAMPAIGN T1 N)

21. Lower the vehicle.

22. Tighten the banjo bolt at the turbocharger to

130 lb-in (1.5 kgf.m).

Use degreaser to clean any residual

or spilled oil.

23. Install the upper heat shield.

24. Tighten the (3) 10mm heat shield bolts to 87 lb-in (1.0 kgf.m).

25. Reinstall the

02 sensor connector bracket and the (1) 10mm bolt to the cylinder head.

• Tighten the

02 sensor connector bracket bolt to 87 lb-in (1.0 kgf.m).

26. Position the

02 sensor harness into the spacer clip at the white mark and ensure that the

remaining harness does not touch the heat shield (as shown below).

27. Start the engine and allow the engine to warm up for several minutes.

28. Inspect the oil feed hose connection points from above and below the engine (at the turbocharger

and the block) for any oil leaks.

29. After all leak point inspections are complete, reinstall both the engine top cover and undercovers.

30. After the engine has been turned off for a few minutes, check engine oil level.

• If the engine oil level on the dipstick is above the L (LOW) level up to F (FULL), then no adjustment is required. (Refer to TSB 1 0-EM-001 for details.) TSB #: 16-01-071 Page 7 of 7quotesdbs_dbs20.pdfusesText_26