[PDF] [PDF] Avery Dennison Etched Glass Film

[PDF] Metalphoto® vs Etched Stainless Steel

However, Metalphoto photosensitive anodized aluminum is actually superior to etched and filled stainless steel in many applications There are five 

[PDF] Acid-etched Glass for Exterior Applications A Unique - Walker Glass

Acid-etched glass can be combined with many different types of glass technologies to create unique effects Here are some examples: - In insulated glass units 

[PDF] Cleaning guide for AGC acid-etched glass in household applications

Always clean the full surface of the acid-etched glass using water or glass cleaner even if only one small area of the glass is dirty Never do spot cleaning, 

[PDF] Specifications for Acid Etched Glass - Syracuse Glass

Acid Etched Glass is a float glass product whose surface has been permanently altered through the application of a hydrofluoric acid solution The result is a 

[PDF] ACID ETCHED GLASS - AGC Yourglass

AGC offers 4 ranges of anti-glare acid etched glass with different gloss levels and textures for display applications: • LST (Low Sparkling Touch)1 • VLST (Very 

[PDF] New Acid Etched Titanium Dental Implant Surface - sbdmjcom

The etched surfaces were evaluated for surface morphology (combination of micro roughness and waviness) and were best attained by a combina- tion of 

[PDF] Satin Etched Glass - General Glass International

Fabrication Cutting – score the unetched side of the glass Mirrors and glass in which both sides are etched, score the etched side but increase cutting pressure

[PDF] Etched Frost (NRMV60F PS3) - LLumar Window Film

cost of etched glass Benefits and selection criteria • All of the characteristics of etched glass without the expense • Softly diffuses light • Can be custom cut for a  

[PDF] Avery Dennison Etched Glass Film

Avery Dennison Etched Glass Films are designed to create the image of etched decorations on glass without the use of etching chemicals and is also suitable 

[PDF] etcher

[PDF] etching

[PDF] etching cream

[PDF] etenders gov ireland

[PDF] etenders government ireland

[PDF] etenders ireland registration

[PDF] etenders ireland.ie

[PDF] etenders northern ireland

[PDF] etenders procurement ireland

[PDF] etf retirement calculator

[PDF] ethanoic acid and alcohol reaction

[PDF] ethanoic acid to ethanoic anhydride

[PDF] ethanol

[PDF] ethanol + ethanoic acid

[PDF] ethanol anhydrous 95

Avery Dennison® Etched Glass Film Cast Vinyl Features • • • • • • • Brilliant visual etched effect Excellent conversion properties on computerised cutters Easy cutting and weeding Outstanding durability and outdoor life Excellent dimensional stability Excellent UV, temperature, humidity and salt-spray resistance Excellent adhesion Common Applications • • Window graphics Architectural signage Description Film: 60 micron cast vinyl with etched effect Adhesive: Permanent acrylic Backing: One side coated bleached Kraft paper, 140gsm Outdoor life: up to 7 years on the outside of external windows Indoor life: up to 7 years on the inside of external windows up to 9 years on internal partitions and windows Conversion Flat bed cutters Cold overlaminating Friction fed cutters Estat printing Die cutting Water based inkjet Thermal transfer Solvent inkjet Screen printing UV Cured inkjet Recommendations for Application • Use a high tack application tape. • To facilitate positioning Avery Dennison Etched Glass Film can be wet applied using 0.5% of neutral detergent added to water. • Water should be removed with a squeegee and firm hand pressure. • Before removing application tape, allow the adhesive to build to a sufficient adhesion level (15-45 minutes). Uses Avery Dennison Etched Glass Films are designed to create the image of etched decorations on glass without the use of etching chemicals and is also suitable for functional and manifestation graphics. Avery Dennison Etched Glass can be applied to flat surfaces and produces best results when applied to transparent substrates such as glass, acrylic sheeting, and polycarbonate.

Avery Dennison Graphics Solutions Asia Pacific www.graphicsap.averydennison.com General Calliper, face film ISO 534 60 micron Calliper, face film & adhesive ISO 534 90 micron Dimensional stability DIN 30646 0.2 mm max Tensile strength DIN 53455 1.0 kN/m Elongation DIN 53455 25% Gloss ISO 2813, 20º 15% Adhesion, initial FINAT FTM-1, stainless steel 540 N/m Adhesion, ultimate FINAT FTM-1, stainless steel 720 N/m Glass 640 N/m PMMA 640 N/m Polycarbonate 640 N/m Flammability Self extinguishing Shelf life Stored at 22° C/50-55 % RH 2 years Accelerated ageing SAE J 1960 1500 hours exposure No negative impact on film performance Expected Durability ** Vertical exposure External applications Applied on the outside of the window Applied on the inside of the window exposed to sunlight up to 7 years up to 7 years Internal applications Applied to internal partitions and windows with no exposure to direct sunlight up to 9 years Chemical Humidity resistance 200 hours exposure No effect Chemical solvent resistance Test Fluid Immersion Time Effect Water 24 hours No effect Detergent (1% solution) 24 hours No effect Detergent solution 65°C 8 hours No effect Isopropyl alcohol/water (20/80) 10 minutes No effect Thermal Application temperature Minimum: + 10oC Temperature range - 50oC to + 100oC Important Information on physical characteristics is based upon tests we believe to be reliable. The values listed herein are typical values and are not for use in specifications. They are intended only as a source of information and are given without guarantee and do not constitute a warranty. Purchasers should independently determine, prior to use, the suitability of any material for their specific use. All technical data is subject to change without prior notice. Warranty Avery Dennison® materials are manufactured under careful quality control and are warranted to be free from defect in material and workmanship. Any material shown to our satisfaction to be defective at the time of sale will be replaced without charge. Our aggregate liability to the purchaser shall in no circumstances exceed the cost of the defective materials supplied. No salesman, representative or agent is authorised to give guarantee, warranty, or make any representation contrary to the foregoing. All Avery Dennison® materials are sold subject to the above conditions, being part of our standard conditions of sale, a copy of which is available on request. **Expected Durability The expected durability of Avery Dennison films are defined as the expected performance life of the Avery Dennison graphic film(s) within Zone 1 of the Avery Dennison zone system, in outdoor vertical exposure conditions. The actual performance life will depend on a variety of factors, including selection and preparation of substrate, angle and direction of exposure, application methods, environmental conditions and cleaning/maintenance of the films. In case of films used in areas of high temperatures or humidity, high altitudes and industrially polluted areas the performance will be further reduced. Expected Durability and Warranted Period Definitions Expected durability is the expected period of time defined in the product data sheet, the product should, but is not warranted to, perform satisfactorily when applied in vertical exposure conditions as defined in Instructional Bulletin 1.30. The warranted period as defined in ICS Performance Guarantee Bulletin 2.3, is the maximum period of time Avery Dennison will warrant the finished products performance in accordance with ICS Performance Guarantee Terms and Conditions 1.0, provided that the film is properly stored, converted and installed in accordance with Avery Dennison guidelines. Dimensional stability: Is measured on a 150 x 150 mm aluminium panel to which a specimen has been applied; 72 hours after application the panel is exposed for 48 hours to + 70°C, after which the shrinkage is measured. Adhesion: (FTM-1, FINAT) is measured by peeling a specimen at a 180° angle from a stainless steel or float glass panel, 24 hours after the specimen has been applied under standardised conditions. Initial adhesion is measured 20 minutes after application of the specimen. Flammability: A specimen applied to aluminium is subjected to the flame of a gas burner for 15 seconds. The film should stop burning within 15 seconds after removal from the flame. Temperature range: A specimen applied to stainless steel is exposed at high and low temperatures and brought back to room temperature. 1 hour after exposure the specimen is examined for any deterioration. Note: Prolonged exposure to high and low temperatures in the presence of chemicals such as solvents, acids, dyes, etc. may eventually cause deterioration. Chemical Resistance: All chemical tests are conducted with test panels to which a specimen has been applied. 72 hours after application the panels are immersed in the test fluid for the given test period. 1 hour after removing the panel from the fluid, the specimen is examined for any deterioration. Corrosion Resistance: A specimen applied to aluminium is exposed to saline mist (5% salt) at 35ºC. After exposure, the film is removed and the panel is examined for traces of corrosion. Test Methods Avery Dennison® Etched Glass Film Rev.3 (Aug 2017)

quotesdbs_dbs19.pdfusesText_25