Hybrid Polyurethane Wood Flooring Adhesive

59_51650_PDS_E1621_11725_1.pdf

1. PRODUCT NAME

ROBERTS

® 1550 MAXCOMPLETE-EZ
TM Hybrid Polyurethane Wood Flooring Adhesive 2. MANUFACTURER

Roberts Consolidated Industries, Inc.

300 Cross Plains Blvd

Dalton, GA 30721

(866) 435-8665 / (706) 277-5294 3. DESCRIPTION

ROBERTS

® 1650 MAXCOMPLETE-EZ
TM is a super strong, single component, all-in-one hybrid polyurethane adhesive formulated to bond engineered wood, solid wood and bamboo ?ooring. This ZERO VOC, moisture-cured formula is permanently elastic, as well as a moisture vapor barrier (providing unlimited protection), crack suppressant (helping to prevent damage to wood as it expands and contracts), and a sound reducer (meeting local IIC and STC requirements). Best of all, ROBERTS 1650 MAXCOMPLETE-EZ cleans effortlessly off pre?nished ?oors, before and after cure.

Sounds Ratings

• STC 62 (ASTM E-90) • ∆IIC 67 (ASTM E-492) Features and Bene?ts• Advanced Hybrid Polymer Technology provides superior product formulation • Easily cleans off pre?nished ?oors before and after cure • Meets local IIC and STC sound reduction codes • Bridges non-structural cracks in concrete • Unlimited sub?oor moisture vapor protection • Highly elastometric to move with the expansion / contraction of wood • Low odor, excellent green grab adhesive • Fast curing and very easy to spread • Suitable for in-?oor radiant heat installation • Contains no water, solvent or isocyanates

Meets Environmental Standards

LEED ® EQc 4.1 (100 g/L limit)SCAQMD, Rule 1168 (100 g/L limit)BAAQND, Reg 8, Rule 51 (120 g/L limit)LEED V4 (<0.5MG/M3)

PASSESPASSESPASSESPASSES

Uses For bonding solid and engineered wood ?oors (panels, boards, planks, strips and longstrips), parquet (mosaic and industrial), as well as chip boards, wood paving (residential) and plywood. May also be used for many other bonding applications that are common for light commercial and residential applications including rubber acoustic underlayment systems.

Coverage and Trowel Options*

Flooring: < 3/4" Solid Wood Flooring;

< 3/4" Engineered Wood Flooring

Coverage: 30-40 ft

2 per gallon

1/4" x 3/16" TigerTooth

™

Flooring: < 3/4" Solid Wood Flooring;

< 3/4" Engineered Wood Flooring

Coverage: 30-35 ft

2 per gallon

1/4" x 1/4"

Flooring: < 3/4" Solid Wood Flooring;

< 3/4" Engineered Wood Flooring

Coverage: 30-35 ft

2 per gallon

1/8" x 1/8" x 1/8"

Flooring: Cork or Rubber Underlayment

Coverage: 80 ft

2 per gallon *The trowel notches referenced are those typically recommended for the type of flooring being installed and are shown as a guide. Consult flooring manufacturer for their specific trowel recommendations.

Substrates

Structurally sound, properly prepared concrete, APA or PS1-95 rated plywood, hardwood, underlayment-grade oriented strand board (lightly sanded) primed gypsum- based sub?ooring and radiant-heated slabs. Existing ?ooring includes: properly prepared ceramic tiles.

Limitations

• Do not install solid wood or bamboo below grade. • Do not install where hydrostatic pressure is present. •