[PDF] AS/EN 9100/9110/9120 2016 Revision General Information Sheet





Previous PDF Next PDF



IAQG

What are the main differences in content between the old and new 9110 versions? 6. How have documentation requirements changed? 7. The standard does not mention 



9110 revision 2016 Key changes presentation

Current Version. New Version. Products. Products and services. Exclusions. Scope of the QMS to be formally defined and all requirements are applicable if they 



Transition à la série AS/EN 9100:2016

versions 2016 de EN9100/9110/9120 — Systèmes de management de la qualité : exigences qui doivent être publiées vers la fin de 2016. Il ne contient pas les 



9110 revision 2016 Key changes presentation

3 janv. 2017 Previous version. New Version. Products. Products and services. Exclusions. Scope of the QMS to be formally defined and all requirements are ...



IAQG

edition (9110:2012) have been changed to improve alignment ... International Aerospace Quality Group (IAQG) 9110:2016 to 9110:2012 and 9110:2012 to 9110:2016.



Revision of the EN/AS 9100:2016 series* – Changes and Impacts

Transition period for EN/AS 9110:2016. Transition period for changing to ISO The new EN/AS 9100 version is intended to take into account the current needs of ...



International Aerospace Quality Group (IAQG) Other Party

for transition to the 2016 versions of AQMS Standards (i.e. 9100/9110/9120:2016). Scope: This supplemental rule applies to the following stakeholders 



Moving to the AS/EN 9100:2016 series

the 2016 versions of EN9100/9110/9120— Quality Management. Systems: Requirements which are due to be published toward the end of 2016. It does not contain 



Requirements Correlation Matrix 9110:2016 (Rev C) vs EASA/FAA

9 avr. 2020 9110:2016 (Rev C) vs EASA/FAA Part 145 Mapping. Revision: Issue 1.0 ... Release of Product. 8.6. 145.A.50. 145.A.55. 145.A.75. 145.201. 145.211.



AS/EN 9100:2016 Revision Frequently Asked Questions

December 2016. Where can I get information about the new structure? The revised version of AS/EN 9100/9110/9120 is based on. ISO 9001:2015 which was developed 



9110:2016 Standard Frequently Asked Questions (FAQs)

What are the main differences in content between the old and new 9110 versions? 6. How have documentation requirements changed? 7. The standard does not mention 



Information on EN 9100:2016 EN 9110/20:2017

EN9110/20:2017 and published the final versions. Since then certification bodies have only carried out audits and issued certificates based on EN9100:2016.



9110 revision 2016 Key changes presentation

?Requirements surrounding the Release of originates from ISO9001:2015 specific to 9110:2016. Colour Code. 9110:2016 Content Summary of Change. Foreword.



Information zur EN9100:2016 EN9110/20:2017

Neue Struktur. Die vorliegende Version der EN9100-Serie ist in zehn. Abschnitte gegliedert: Information zur. EN9100:2016. EN9110/20:2017.



9110 revision 2016 Key changes presentation

Dec 2015 Ballot (IAQG). May 2016 9110 complete through IAQG Ballot. Oct 2016. Formatting of Sector Versions. Nov 2016 Publication Approval / Publication.





Drucksache 18/9110

07.07.2016 Drucksache 18/9110 ... April 2016 aufgrund eines Erlasses des Bundesministeriums für Verkehr und ... B. Versionsnummer (CALID) und Prüfsumme.



Moving to the AS/EN 9100:2016 series

Quality Management Systems (QMS) AS/EN 9100/. 9110/9120:2016 which replace the previous versions. These are based on ISO 9001:2015



Untitled

EN 9110:2016 Quality Management System - Aerospace - Requirements for FSSC 22000 Certification Scheme for Food Safety Management Systems Version 4.



International Aerospace Quality Group (IAQG) Other Party

12.10.2016 for transition to the 2016 versions of AQMS Standards (i.e. 9100/9110/9120:2016). Scope: This supplemental rule applies to the following ...



9110:2016 Standard Frequently Asked Questions (FAQs)

9110:2016 used the term continual improvement to emphasize the fact that this is an ongoing activity However it is important to recognize that there are a number of ways in which an organization may improve Small step continual improvement is only one of these 9110:2016



EN 9100 EN 9110 and EN 9120 - Aerospace Quality Standards

Recommendations for changing to EN/AS 9100:2016 The publication of the EN/AS 9100 revision is expected for late 2016 However you will have to have already switched to the new standard by 09/15/2018 The previously customary transition period of 3 years has thus been significantly shortened



AS/EN 9100/9110/9120 2016 Revision General Information Sheet

AS/EN 9100/9110/9120 2016 Revision General Information Sheet June 2016 The AS/EN 9100 series the leading aerospace Quality Management System (QMS) standards are being revised to ensure they stay in line with ISO 9001 which was revised in 2015 and upon which they are based



Information on EN 9100:2016 EN 9110/20:2017 - tuvsudcom

EN 9100:2016 EN 9110/20:2017 New structure The new standard of the EN9100 series comprises ten clauses: TÜV SÜD Management Service GmbH Summary of the key changes The new structure is designed to make the standard more generic and more easily applicable by service industries



Requirements Correlation Matrix 9110:2016 (Rev C) vs - IAQG

9110:2016 (Rev C) vs EASA/FAA Part 145 Mapping Revision: Issue 1 0 – Apr 9th 2020 Page 2 of 3 Introduction This document has been created by the IAQG 9110 writing team to provide generic correlation of key AQMS subjects/topics between the requirements of AS/EN/SJAC 9110:2016 (Rev C)



Requirements Correlation Matrix International Aerospace

9110:2016 (Rev C) vs EASA Part-145 (Section A) Correlation Matrix th Revision: Issue 1 3 – Apr 9 2020 Page 1 of 19 Requirements Correlation Matrix International Aerospace Quality Group (IAQG) AS/EN/SJAC 9110:2016 (Rev C) vs European Aviation Safety Agency (EASA) Commission Regulation (EU) 1321/2014 Part-145 Section A



AS/EN/JISQ 9100:2016 EVALUATION GUIDANCE MATERIAL - IAQG

• 9100:2016 clause 0 3 describes the process approach developing implementing and improving the effectiveness of a Quality Management System • 9101:2016 clause 0 2 describes the process approach when evaluating an organizations QMS



BSI Training Academy

AS/EN/JISQ 9110:2016 Internal Auditor training course Essential information about the course AS/EN/JISQ 9110 is the internationally recognized Quality Management System (QMS) that’s been developed specifically for aerospace Maintenance Repair and Overhaul (MRO) organizations whether on contract or permanent basis It helps



Maintenance Organizations BSI Standards Publication

EN 9110:2015 (E) 8 Quality management systems — Requirements 1 Scope 1 1 General This standard includes ISO 9001:2008 1)quality management system requirements and specifies additional aviation maintenance industry requirements definitions and notes as shown in bold italic text



Definition and Documentation Nonconformance Data BSI

BS EN 9131:2016 EN 9131:2016 (E) 4 Rationale This European Standard has been significantly revised further defining process requirements and data expectations; restructuring the nonconformity documentation data and providing further definition of data descriptions; and providing process defect cause and corrective action cod es



Requirements Correlation Matrix International Aerospace

This document has been created by the IAQG 9110 writing team to provide detailed correlation between the requirements of AS/EN/SJAC 9110:2016 (Rev C) and the Federal Aviation Administration (FAA) Code of Federal Regulations (CFR) 14 Part 145



Searches related to en 9110 version 2016 filetype:pdf

EN 9110:2018 based on ISO 9001:2015 technically equivalent to AS9110C and SJAC9110B The audit was performed in compliance with EN 9104-001:2013 This certificate is valid for the following scope: Maintenance inspection and testing services for tooling and testing equipment Place and (re-)issue date: Essen 04 02 2019 For the Accredited Unit:

What is en 9110?

  • The standard applies to organisations that design, develop and produce any type of aerospace systems/components, including installation and servicing activities. EN 9110 - Quality Management Systems - Model for Quality Assurance for Aerospace Maintenance Organisations.

What is The IAQG 9110 Rev C document?

  • This document has been created by the IAQG 9110 writing team to provide detailed correlation between the requirements of AS/EN/SJAC 9110:2016 (Rev C), and Commission Regulation (EU) 1321/2014 Part-145 Section A, including amendments (2015/1088, 2015/1536, 2018/1142), commonly known as EASA Part-145.

What is the as/en/SJAC 9110 document update policy?

  • AS/EN/SJAC 9110:2016 Robert Starcke Paula Adkins Paula Adkins Document update policy This document may be updated periodically. Major updates will be indicated by an increase to a higher revision number (e.g. revision 1.0 to revision 2.0). Minor updates and corrections will be indicated by a decimal change in

What is en 9103?

  • — EN 9103, Variation Management of Key Characteristics: This document standardizes requirements for “key characteristic” identification, control, documentation and approval for the industry.

AS/EN 9100/9110/9120 2016 Revision

General Information Sheet

June 2016

The AS/EN 9100 series, the leading aerospace Quality

Management System (QMS) standards are being

revised to ensure they stay in line with ISO 9001 which was revised in 2015 and upon which they are based. Important key areas of the revised AS/EN 9100 series of standards will include:

Context of the Organization

It requires you to consider the relevant stakeholders and their needs in planning and implementing, monitoring and improving the QMS.

Improved risk & opportunity management

It will help identify and manage risk more effectively and opportunities that contribute to bottom line improvements.

Provide an integrated approach

The AS/EN 9100 series will be written according to Annex SL, the new High Level Structure used by ISO. It will be easier to implement more than one management system standard, such as AS/EN 9100, ISO 14001, ISO

45001 etc. providing a more holistic view leading to

cost savings.

New focus on leadership

Greater involvement by the leadership team to

ensure that all personnel are motivated towards the organizations goals, objectives and the achievement of their intended outputs of their QMS. About the AS/EN 9100 Series RevisionThe new AS/EN 9100/9110/9120 The AS/EN 9100 series is based on ISO 9001:2015, which is based on Annex

SL - the new High Level Structure (HLS)

that brings a common framework to all new ISO management systems. There are 10 clauses in the new standard:

Clause 1

- Scope

This is the aim of the standard; it specifies the

requirements for a QMS that can be used by organizations to enhance their customer satisfaction.

Clause 2

- Normative references

SO 9000 - Quality Management Systems -

Fundamentals and vocabulary.

Clause 3

- Terms and definitions The terms and definitions are in ISO 9000:2015 (they are not provided in ISO 9001). AS/EN adds further aerospace-specific definitions.

Clause 4

- Context of the organization Determine internal and external issues, interested

parties that are relevant to its purpose and its strategic direction, to consistently provide products and services that meet customer expectations, consistently.

Clause 5

- Leadership

Top management is now accountable for the

effectiveness of the QMS.

Clause 6

- Planning Development and use of planning processes to address the internal and external issues, interested parties and risks and opportunities within the scope of the QMS.

Clause 7

- Support Resources, knowledge and competency required for an effective QMS. Awareness and communication of QMS.

Continued >>

AS/EN 9100 series Transition Journey

Consider further services to help implement the changes

The Importance of

leadership

Gap assessment

The importance of risk in

quality management

Transition assessment

Introducing

Annex SL

Transition guide

BSI Business

Improvement Software

Frequently asked

Questions

Download our additional resourcesAttend one of our training courses, to help you fully understand the cha

ngesVisit the BSI website bsigroup.com for the latest support material and w hitepapers

Buy a copy of the Standard as soon as possible

Senior management

brieng

General transition

Clause 8

- Operations Plan, implement and control the processes needed.

Clause 9

- Performance evaluation Organizations shall evaluate their performance and the effectiveness of the QMS.Clause 10 - Improvement

Determining and selecting opportunities for

improvement and implementing necessary actions to achieve the intended outcomes of the QMS and enhance customer satisfaction. We anticipate that approximately 85% of AS/EN 9100 will be contained in I

SO 9001:2015. Clients will

need to be early with their transition as this must be completed by

14th September 2018.

The final version of AS/EN 9100 is expected in October 2016, 9110 in N ovember 2016 and 9120 in December 2016. Clients will need to transfer their certification to the new version o f the standard by

14th September 2018

All BSI assessments from 15th June 2017 will be to the new version of th e standard. This is an International

Aerospace Quality Group (IAQG) transition rule.

BSI can help you understand, implement and certify to gain the maximum b enefits The guide below shows how clients can prepare for their transition and t he services and support available from BSI.

Continued >>

AS/EN 9100/9110/9120 2016 Revision - General Information Sheet

© BSI Group BSI/UK/861/SC/0516/EN/BLD

AS/EN 9100/9110/9120 2016 Revision - General Information Sheet This is the internal process to be followed from the booking of the clie nts' transition audit through to their certificate issue.

NCRs raised?

NCRs closed?

Certicate issued

Transition audit

required

Book readiness

review meeting.

Issue readiness

review form

Client completes

readiness review form

Client Manager and client

conduct readiness review.

Determine audit duration based

on risk, complexity, activities etc.

Determine when the audit is to

be conducted based on client

QMS readiness.

Record audit duration

and justication on

Audit calc.

OASIS admin

Upload Audit calc.

to OASIS

Client Manager.

Conduct follow-up.

Close NCRs

Client

carries out CA

Certicate review

Plan audit and

communicate plan to client

Planning.

Book audit and confirm

to CM and client

Audit team.

Conduct on-site

assessment Yes Yes NoNo Find o ut mo re C all: +

Visit:

bsigroup.quotesdbs_dbs17.pdfusesText_23
[PDF] en 9120 version 2016

[PDF] en comptabilité de gestion

[PDF] en les illustrant

[PDF] en nf 15232

[PDF] en norme définition

[PDF] en oxford

[PDF] en que consiste el desarrollo militar

[PDF] en que consiste un sistema de gestion ambiental

[PDF] en quelle année la petite musique du slogan voit elle le jour

[PDF] en quoi apple est elle une entreprise performante

[PDF] en quoi apple est une organisation performante

[PDF] en quoi chaque forme d'innovation peut elle contribuer a la croissance economique

[PDF] en quoi consiste la certification

[PDF] en quoi consiste la méthodologie économique

[PDF] en quoi consiste la politique de la concurrence de l union européenne