NOM: Network-On-Memory for Inter-Bank Data Transfer in Highly
memory banks of a 3D-stacked memory. NoM adopts a TDM-based circuit-switching design where circuit setup is done by the memory controller.
AIRES & VOLUMES Nom de la figure Représentation Aire Trapèze
Nom du solide. Représentation. Volume. Parallélépipède rectangle de longueur L de largeur l et de hauteur h. Le cube de côté c en est un cas.
Transaction / Regular Paper Title
To copy data across different banks NoM adds a Time- division Multiplexed (TDM) circuit-switching mechanism to the. 3D-stacked DRAM memory controller. With NoM
CodeCity: 3D Visualization of Large-Scale Software
CODECITY is a language-independent interactive 3D visualization we use a containment-based layout inspired by rectangle-packing.
Precision of 3D CT-Systems
which absorb radiation and serve as the basis for the numerical 3D reconstruction of the volume data Nom CAD 23.500 30.000 70.500 54.500 47.000 24.500.
FICHE CIBE
Borne 300 de type ECP-2D-3D (points de fixation fond de cuve compatibles). Borne CIBE® Grand Volume nue (serrure rectangle). Nom. Enedis 69.80.830.
A Section A-A 4B 4C 4A 1 2 3D 3A 4B 3B 4A 3D 3A 3C 2 4C 4C A
Steel Sleeve - (Optional) - Nom 5 in. (127 mm) diam (or smaller) Schedule 10 (or heavier) steel pipe sleeve cast or grouted.
PDF-XChange Editor V7 USER MANUAL
F_3DPlugin - the plugin that enables the viewing of embedded 3D content in PDF default shapes are available such as circles and rectangles
La vue graphique 3D
Comme son nom l'indique la vue Graphique 3D permet de représenter un cer- tain nombre de solides : prismes (droits ou non)
GHD16R-LED-LENS3D Standard Nomenclature 1
suspension kit # GHDB-SSK can be obtained from Hunter Douglas. See page 5. ** 90+ CRI option reduces efficacy by nom. 10%. *** 3D lens protrudes from
Shape and space activities 2D and 3D shapes
Entry Level 3 - recognise and name simple 2D and 3D shapes and their properties Level 1 - Construct geometric diagrams models and shapes Level 2 - Recognise and use 2D representations of 3D objects MSS2/E1 1 Recognise and name simple 2D and 3D shapes (a) know the names of common 2D shapes e g rectangle square circle
To be able to identify and name 2-D and 3-D shapes
rectangle circle square To be able to identify and name 2-D and 3-D shapes heptagon octagon pentagon hexagon To be able to identify and name 2-D and 3-D shapes py r
Past day
Nom des Figures Géométriques
Indiquer à dCode le nombre de faces et il trouvera le nom de la figure géometrique 3D. Exemple : 6 : HEXAEDRE Exemple : 12 : DODECAEDRE Voici un tableau de toutes les formes géométriques régulières de l'espace 3D (table des noms de polyèdres à n faces) : Comment apprendre les figures géométriques ? lgo algo-sr relsrch richAlgo" data-97a="64667a1abb1de">www.dcode.fr › figures-geometriqueNom des Figures Géométriques - Formes 2D, 3D - Liste en Ligne www.dcode.fr › figures-geometrique Cached
GHD16R-LED-LENS3D
Hunter Douglas reserves the right to change deta/ils of fixture designs and construction at any time. Product Overview(for complete specifications, see page 2)Construction: For use in Hunter Douglas High Profile 6Series™ Baffle ceiling systems only.Extruded aluminum
housing is available in one piece up to 20/" with just two points of suspension. Contin/uous runs have hairline joints with no
light leak. Runs of fixtures can be built to /match field conditions, including patterns.Electrical:LED components by major manufacturers. Fixtures/ can be fitted with control interface devices an/d specialty
LED components (consult factory). Standard O/utput, High Output and Custom-Programmed Output/ options available.
Optical:Lenses available in medium and heavy diffusion to provide varying degrees of output and /reduced visibility of
individual LEDs in 3D lens. Finish/Color:High quality paint finish matches Hunter Douglas /standard.Standard Nomenclature
1Click Photo to view product page
Continuous Illumination:LED boards can be oriented to provide consist/ent illumination.Page 2 Specifications
Page 4-5
Photometric /Lens Images
Page 6 Mounting Details
Revision Date:
Feb 2017General Illumination
Direct Distribution with 3D Lens
LED Lamping
Because LED components continue to improve, click or scan QR code to view latest spec sheet A H unter D ouglas B affleCeiling Integration
(Standard suspension components by HunterDouglas. Supplemental
suspension kit available.See page 6.)
Cross Section
(nom) ShapeFixture Length
Length OptionDriver Options
Mounting Method
Shielding ***Provider
Voltage
1 " x 6 H unter D ouglasPaint Colors NATGammalux match
of Hunter Douglas Nat ural #7163 COT10Gammalux
match of Hunter Douglas Cot ton White #0280GHD16R1SL358120VDVR4' N HDB ASLMD3D.8NAT
Options
XX R ectangularCRI **
8 for 80+ 9 for 90+ N Nominal length SSpecific length120, 277,
UNIV DLUL Damp Label
EMERGEmergency ckt.
Lamp Type
LEDOutput
Color Temp. (nom)
DVRStatic Driver
For Dimming Options,
See pg 2
LED Arrays in X-Sec
1 S Standard Output H High Output (If RGB, select H)C Custom-Programmed Output 272700 K
303000 K
353500 K
404000 K50 5000 K
RGB (select output code H) *ASLMD3D.8
Acrylic
Satin Lens
(Medium Diffuse)ASLHD3D.8
Acrylic
Satin Lens
(Heavy Diffuse) Up to 12' single-piece housings available. * RGB must be High Output and controlled by/ DMX driver option.Mounting: For use in Hunter Douglas H6igh Profile Series™ Baffle ceiling systems o6nly.Standard suspension
components are provided by Hunter Douglas. If r/equired by local building code or structural engine/er, supplemental
suspension kit # GHDB-SSK can be obtained /from Hunter Douglas. See page 5. ** 90+ CRI option reduces efficacy by nom. 10%. *** 3D lens protrudes from housing by .8/".Electrical
Output:
Standard(S) and high(H) options deliver a pre-set lumen package through /the fixture shilelding (see chart below).
Custom- programmed output(C) is specified as 50-99% of the high /output lumen or watts-per-foot value (restrictio/ns apply).
Static Driver:Osram Optotronic* programmable driver, wired for static operation(DVR).0-10V Dimming:Osram Optotronic* programmable driver, wired for 0-10v control and dimming /to 10% (ZTV10)or to 1% (ZTV1).
Step Dimming:
Generic step dimming driver, two hot inputs for 100% and 50/% output (SD2).DMX Dimming:
Generic DMX driver with three loose control wire/s exiting fixture at power feed location(DMX).DALI Dimming:Generic DALI driver with two loose control wi/res exiting fixture at power feed location (DALI).
Lutron Dimming:
Hi-Lume 1% via EcoSystem control
(LAE) . Hi-Lume 1% via 3-wire control(LA3W). Hi-Lume 1% EcoSystem with Soft-On, Fade-to-Black(LDE1). 5-Series EcoSystem (LDE5).Eldoled Dimming:
SOLOdrive .1% via 0-10v control (/
SLZTV ). SOLOdrive .1% via DALI control (/SLDALI
). ECOdrive .1% via 0-10v control ( ECZTV ). ECOdrive .1% via DALI control /(ECDALI
). LINEARdrive .1% via DMX control /(LINDMX
White Emitter*:
Nichia 757G emitters binned within 3 MacA/dam ellipses in Osram PrevaLED Linear or Ga/mmalux proprietary array.
90+ CRI option (CRI code 9) resu/lts in nom. 10% drop in efficacy; reduce calculated lumens by approximately 1/0%
RGB:Uses two rows of Osram 72618*. RGB/ with all channels at full output consumes appro/ximately 11 watts per foot.
- Red channel at full output will provide app/roximately the same # of lumens compared to o/ur 3,500K white at High Output.
- Green channel at full output will provide a/pproximately 171% of lumens compared to ou/r 3,500K white at High Output.
- Blue channel at full output will provide /approximately 35% of lumens compared to our /3,500K white at High Output.
Battery Pack:
Integral Bodine BSL310LP*. 4W max in/put. 10W initial output.LED System:
70% lumen output (L70) at max 5/5 degrees C reported at >60k hours. /Fixtures are shipped with anti-static gloves to /
minimize the risk of damage to LEDs during /installation. 5 year limited warranty.Upgrade Capability:LED assemblies can be replaced in the future /with the latest factory-provided and fully warrante/d components.
On-board sensors, control interface devices and a/lternate LED components may be specified (con/sult factory). Max driver cross
section 1.0" x 1.2". Fixtures bea/r UL & cUL Dry Location label. Damp Location label ava/ilable (DL).
*Subject to availability; may be substituted by /Gammalux. 2Specifications
GHD16R-LED-LENS3D
General Illumination
Direct Distribution with 3D Lens
2700 K3500 K 4000 K 5000 K3000 K 2700 K3500 K 4000 K 5000 K3000 K
ASLMD3D.8442.4ASLMD3D.8
ASLHD3D.8 ASLHD3D.8
6.35 WPF (nom)9.4 WPF (nom)
ESTIMATED LUMENS PER FOOT DELIVERED BY WHITE LEDS AND 3D.8 LENS (@ 80+ CRI) Consult factory for options on custom output or wattage consumption. *IES files were created using 3500K boards.
Values were then adjusted by a factor of .92 for 2700K, .98 for 3000K, 1 .04 for 4000K and 1.06 for 5000K boards.351.9471.2
Construction
Housing:
Extruded aluminum body 1.5" wide x 6.3/5" high, 6063T5, 0.070" /min thickness. In continuous runs, each housing i/s 12" max
unless previously coordinated with the factory, up to 20" in a single piece. All fixtures are built per approved factory draw/ings and tested
as a complete system at the factory. Fixtures ordered as individuals cannot be joi/ned together in the field.
Joiner System:Automatic alignment, no loose parts, one tool /to tighten two factory installed bolts for hairline/ seam. No light leaks. All
fixtures are assembled into a complete pattern and /tested for fit and finish at the factory prior /to being individually packed
and shipped.Lamping:Runs built to Specific Length (Length Option S) require special lamping components to create c/onsistent illumination and
may have a higher than normal price per foot. /Runs built to Nominal Length (Option N ) may be length-adjusted at the factory to /usestandard lamping components. Factory drawings will /show all dimensions for approval prior to productio/n.
Mounting:Aircraft cable is 7x7 stranded stainless stee/l with stopper fitting at the top end. Lower /end strands are welded and ground for
easy insertion into adjustable cable gripper ( C ). Feed cord is straight, white 3/C /SVT or SJT #18 AWG.Opticle
Acrylic Satin Lens, Medium Diffuse: 6
Snap-in. Shall be 15% DR acrylic
(ASLMD).Acrylic Satin Lens, Heavy Diffuse: 6
Snap-in. Shall be 15% DR acrylic
(ASLHD)See lens images on pages 4 and 5.
3Specifications (continued)
GHD16R-LED-LENS3D
General Illumination
Direct Distribution with 3D Lens
Packing and Shipping
Fixtures built for continuous rows and patterns /are given a specific location identifier, clearly identified on factory layout drawings
provided to installing contractor. Location identifier is printed on the fixture"/s ID Label, protective wrapping and on each /end of fixture
carton. Shipping pallets are built with 2" c/learance, extending beyond the length and width of/ cartons, providing shipping prot
ection.Approx. weight of 4" module is 11 lbs. including carton. Weight of pallet and supplemental packing materials /not factored in.
NATCOT10
DFinish
Housing is electrostatically sprayed with high solids /aliphatic two component polyurethane to an average /thickness of 2 mils. o
ver acid etching primer or commercial clear annodizing. NATGammalux match of Hunter Douglas Natural #71/63, COT10Gammalux match ofHunter Douglas Cotton White #0280
4 * See performance notes, page 2.IES files were created using 3500 K /boards. When using calculation programs, multiply lu/men output or set correction factor to
.92 for 2700K, .98 for 30/00K, 1.04 for 4000Kand 1.06 for 5000K boards. **E/fficacy is a measure of lumens per watt, as d/elivered through the fixture aperture.
GHD16R-LED-LENS3D
General Illumination
Direct Distribution with 3D Lens
IESNA:
ISSUEDATE:
TEST:TESTLAB:
MANUFAC:
LUMCAT:
LAMPS:
Acrylic Satin Lens,
Medium Diffuse
(ASLMD3D.8) FIXTURE USES LENS ASLMD3D.8 (MEDIUM DIFFUSE) AND 3500 K BOARDS @ 80+ CRI10 20 30 40 50
6070 80 90 100
Quadralaterally Symmetric
Dashed: 0 Degrees Solid: 90 Degrees
250500
750
1000
LM 79-2008
04/17/14
ITL81306 MOD TO 2014 COMP & SO
ITL, INC.
GAMMALUX LIGHTING SYSTEMS
GB16D-1SOLED35-ASLMD3D.8
73605 PLPG2-Lin-1100-835-280x19-DC
100.8 LPW
13% 86%DIRECT
RECTANGULAR
0.13 (Feet)
3.83 0.0725.4EFFICACY (Total): DISTRIBUTION % UP:DISTRIBUTION % DOWN:
CIE CLASSIFICATION:
LUMINOUS OPENING:
INPUT WATTS: Width:Length:Height:
IESNA:
ISSUEDATE:
TEST:TESTLAB:
MANUFAC:
LUMCAT:
LAMPS:
Acrylic Satin Lens,
Heavy Diffuse
(ASLHD3D.8)Width:
Length:
Height:
FIXTURE USES LENS ASLHD3D.8 (HEAVY DIFFUSE) AND 3500 K BOARDS @ 80+ CRILM 79-2008
04/21/14
ITL81307 MOD TO 2014 COMP & SO
ITL, INC.
GAMMALUX LIGHTING SYSTEMS
GB16D-1SOLED35-ASLHD3D.8
73605 PLPG2-Lin-1100-835-280x19-DC
10 20 30 40 50
60 70 80 90 100
Quadralaterally Symmetric
Dashed: 0 Degrees Solid: 90 Degrees
100200
300
400
EFFICACY (Total):
DISTRIBUTION % UP:
DISTRIBUTION % DOWN:
CIE CLASSIFICATION:
LUMINOUS OPENING:
INPUT WATTS: 87.7 LPW
15% 84%DIRECT
RECTANGULAR
0.13 (Feet)
3.83 0.07 25.4Photometric Reports for
STANDARD OUTPUT FIXTURES
5 * See performance notes, page 2.IES files were created using 3500 K /boards. When using calculation programs, multiply lu/men output or set correction factor to
.92 for 2700K, .98 for 30/00K, 1.04 for 4000Kand 1.06 for 5000K boards. **E/fficacy is a measure of lumens per watt, as d/elivered through the fixture aperture.
GHD16R-LED-LENS3D
General Illumination
Direct Distribution with 3D Lens
IESNA:
ISSUEDATE:
TEST:TESTLAB:
MANUFAC:
LUMCAT:
LAMPS:
Acrylic Satin Lens,
Medium Diffuse
(ASLMD3D.8) FIXTURE USES LENS ASLMD3D.8 (MEDIUM DIFFUSE) AND 3500 K BOARDS @ 80+ CRILM 79-2008
04/17/14
ITL81306 MOD TO 2014 COMP
ITL, INC.
GAMMALUX LIGHTING SYSTEMS
GB16D-1HOLED35-ASLMD3D.8
73605 PLPG2-Lin-1100-835-280x19-DC
Width:
quotesdbs_dbs44.pdfusesText_44[PDF] groupe verbal cm2
[PDF] parallélépipède triangle
[PDF] tenures moyen age
[PDF] statut des salariés dans un gie
[PDF] comment présenter un groupement de textes
[PDF] methodologie groupement de textes
[PDF] modèle lettre de licenciement pendant la période d'essai au luxembourg
[PDF] lettre de licenciement luxembourg modele
[PDF] activité groupes caractéristiques seconde
[PDF] colonne echangeuse d'anion
[PDF] résine échangeuse d'ions pdf
[PDF] groupe caractéristique ibuprofène
[PDF] capacité d'échange d'une résine
[PDF] résine échangeuse d'ions tp