[PDF] BaoFeng UV-5R Channel Programming Cheat Sheet 7/19/2018 PDF BaoFeng-UV5R-F8HP.pdf

BaoFeng UV-5R Channel Programming Cheat Sheet 7/19/2018 Key Concepts ALWAYS place the radio in “frequency mode” by toggling the orange

UV-5R Cheat Sheet txt When manually programming duplex frequencies into the UV-5R you will be first enter and save your receive frequency in a desired

[PDF] BaoFeng UV-5R Channel Programming Cheat Sheet 7/19/2018

BaoFeng UV-5R Channel Programming Cheat Sheet 7/19/2018 Key Concepts ALWAYS place the radio in “frequency mode” by toggling the orange

[PDF] BAOFENG UV-5R - Multnomah County ARES

BAOFENG UV-5R Turn ON/OFF and Adjust volume: turn knob on top INITIAL SET UP: Turn off dual monitor mode: MENU-7-MENU-0-MENU-EXIT

[PDF] Baofeng UV5R-eyes-free

2 juil 2012 · Added menu codes and moved DCS codes to a table Jim Mayes,KC5QDM All the folks on the Baofeng UV-5R Yahoogroup for hints on

[PDF] Reference for UV-5R Menus by Jim Unroe - KC9HI 13-July - Miklor

13 juil 2014 · PTT-ID (Signal-CODE) Selection Selects 1 of 15 signal codes The signal codes are programmed with software and are up to 5 DTMF signals

[PDF] BAOFENG Baofeng Quick Reference Guide by Rich Bugarin W6EC

Basic Operation: The VFO / MR Button toggles basic operation between VFO = Variable Frequency Operation mode (Frequency Mode) and MR = Memory mode

[PDF] Baofeng UV-5R - The (Chinese) Radio Documentation Project

Scanning To resume scanning you must press and hold the key again Tone Scanning In frequency mode you can scan for CTCSS tones and DCS codes on

[PDF] Baofeng_UV-5R Cheat_Sheetpdf - KE8OMY

18 jui 2020 · https://w7apk com/baofeng Baofeng Cheat Sheet (https://amazon com/dp/ B072HXQ5GG/?tag=w7apk-20) The Baofeng UV-5R

[PDF] UV-5RV2+ - Baofeng Radio

The UV-5R is a dual band/dual display radio made to combine extensive Allows storage of up to 105 programmable DCS codes and 50 CTCSS privacy codes

[PDF] CERT Communications - Issaquah Citizen Corps

30 mar 2017 · A Collection of Cheat Sheets Basic Radio: Baofeng UV-5R ($25-$30) or BF- F8HP ($60-$70) Programming Your Baofeng UV-5R Radio

BaoFeng UV-5R Channel Programming Cheat Sheet7/19/2018

Key Concepts

iALWAYS place the radio in "frequency mode" by toggling the orange [VFO/MR] button iALWAYS set receive and transmit frequency on the top or A line by toggling the blue [A/B] button iALWAYS delete a channel's content before storing new content iReceive and Transmit frequencies are stored in two separate operations iREMEMBER to toggle back to "channel mode" to test programming.

User Interface

The menu system is entered via the [MENU] button, and exited via the [EXIT] button. While in the menu system,

the different menu items can be selected by entering the item number, e.g. 13 for T-CTSS or using the [▲]

and[▼] keys to scroll between menu items. When the desired menu item is displayed on the top line, the value

can be modified by pressing [MENU] a second time. The voice prompt will announce the choice and the cursor

will indicate that the bottom line is active This allows entering a value directly using the numeric key or using the

[▲] [▼] keys to scroll between values. After the desired value has been entered/selected, press [MENU] a third

time to hear the voice prompt {confirm} . If an error is made, you can cancel by pressing the [EXIT] button.

Transmit and Receive Frequencies

Repeaters typically specify their transit frequency and (receive) offset. VHF (2 m) repeaters typically have an

offset of 0.600 MHz, UHF repeaters (70 cm) typically have a an offset of 5.000 MHz. Offset is either added

(positive offset) to or subtracted from (negative offset) the repeater transmit (or Baofeng receive) frequency,

depending on the repeater's transmit frequency and local convention.

Essential Menu Items

The BaoFeng has 41 menu items/functions/tasks, only 3 of which are essential

Menu ItemMenu NameDescription

13T-CTCSTransmit - Continuous Tone Coded Squelch System

27MEM-CHStore a (receive/transmit) frequency to a Memory Channel

28DEL-CHDelete both receive and transmit frequencies from a Memory Channel

Repeater Example

You want to program a repeater on "147.160 MHz, +0.6 MHz offset, 146.2 Hz tone" into channel 21. The receive

frequency is 147.160 MHz, while the transmit frequency will be 147.760 MHz. iEnter Receiving Frequency on top line, omitting decimal point: 147160 iDelete channel 21: [MENU] 28 [MENU] {delete channel} 021 [MENU] {confirm} iSet Transmit CTCSS tone: 13 [MENU] {ctcss} [▲] [▼] [MENU] {confirm} iSet Receiving Frequency: 27 [MENU] {memory channel} 021 [MENU] {receiving memory}[EXIT] iEnter Transmit Frequency on top line, omitting decimal poin: 147760 iSet Transmit Frequency: [MENU] 27 [MENU] {memory channel} [MENU] {transmitting memory} [EXIT]quotesdbs_dbs2.pdfusesText_4

[PDF] [PDF] BaoFeng UV-5R Channel Programming Cheat Sheet 7/19/2018

[PDF] UV-5R Cheat Sheettxt - Notepad