PEINTURE POLYURETHANE PU 35 - Plastor
La peinture de sols polyuréthane, non glissante par nature, peut être rendue antidérapante par l’adjonction de silice C4 PREPARATION : Incorporer la silice à la peinture dans la proportion de 10 en poids maximum Densité du polyuréthane : 1 3 (environ) Densité de la silice C4 : 2 7 (environ) Utiliser un agitateur électrique
Guide des Peintures Industrielles Industrial Coatings Guide
Densité : 1,85 ± 0,05 Rendement /épaisseur : 8,6m²/kg/40μm - 16m²/L/40μm Rapport de mélange : Mono Composant Temps de séchage : Hors poussière : 1h Sec au toucher à 20°C : 4h - Recouvrable :24h Conditionnement : 1 kg - 5 kg - 25 kg Dilution : D66 (5 à 15 ) Durée de stockage : 1 an PeiNtUre aNtirOUille Pgl Primaire
3M PRODUCT DATA SHEET
Base Polyuréthane durcissable à l’humidité Densité 11,74 g/cm3 Couleur 08694 (noir), 08694 (gris), 08689 (blanc), 08365 (beige) Point éclair 33° (méthode du vase fermé) Teneur en matière sèche 0,95 Consistance Pâte épaisse Solvant Quantité minimale de xylène Température d’utilisation -31 ° à 82 °
PEINTURE TYPE BI-COMPOSANT POLYURETHANE ET EPOXY APPLICATION
Peinture-RAL com - Retro-marques Distribution - BP60021 - Sennecey - 71326 Chalon sur Saône - France Pour toute assistance, merci de nous contacter : Tél : 07-84-66-42-96 SARL au capital de 151 000,00 Euros - SIRET: 79503066700013 - APE: 4673A - TVA intracom : FR44 795 030 667 PEINTURE TYPE BI-COMPOSANT POLYURETHANE ET EPOXY
CHIMIE - Janton
Densité Density Peu dense d = 200 Expansion x 5,3 Densité moyenne d = 300 Expansion x 4,2 Très dense Peinture polyuréthane monocomposant à pulvériser
POLYURÉTHANE DE COULÉE SOUS VIDE POLYURÉTHANE D’INJECTION
Densité à 25°C Densité produit réticulé à 23°C ISO 1675 :1975 ISO 2781 :1988 1,17 - 1,12 - - Une peinture polyuréthane est recommandée RIM 620
RAPPORT D’ESSAIS D’EXTENSION DE REACTION AU FEU N° RA15-0331
IPCS Moyen « primaire polyuréthane » = 20,748 MJ/kg Epaisseur sèche du primaire : 25 Hm Densité du primaire : 1500 kg/m 3 Qantité sèche du primaire : 37,5 g/mL IPCS Surfacique « primaire polyuréthane » = 20,748 x 0,038 = 0,788 MJ/mB Le primaire, la peinture de finition et le vernis sont des composants non substantiels adjacents et
PX 5210 ISOCYANATE RIM 620 PX 5213 POLYOL RIM 620
Densité du produit polymérisé à 23°C ISO 1675 : 1985 ISO 2781 : 1996 1,07 - 1,02 - - 1,06 Une peinture polyuréthane est recommandée RIM 620
SIGMALAK MAT LA ÉCORATION INTRIEURE LES PEINTURES MATES
Densité (masse volumique à 20 °C) : 1,26 (± 0 05) g/cm³ Rendement moyen : 12 à 14 m²/ L selon la nature du support Temps de séchage (à 23° et 50 d’humidité rel ) : Sec au toucher : 1 à 3 heures Redoublable : 5 heures Teintes : ®Blanc, teintes du nuancier Chromatic Conditionnements : 1 L - 3 L - 10 L Peinture laque mate acrylique
SIGMALAK SATIN LA ÉCORATION INTÉRIEURE LES PEINTURES SATINÉES
Densité (masse volumique à 20 °C) : 1,26 (± 0 05) g/cm³ Rendement moyen : 12 à 14 m²/L selon la nature du support Temps de séchage (à 23° et 50 d’humidité rel ) : Sec au toucher : 1 heure Redoublable : 5 heures Teintes : ®Blanc, teintes du nuancier Chromatic Conditionnements : 1 L - 3 L - 10 L Peinture laque satinée acrylique
[PDF] extrait sec peinture définition
[PDF] extrait sec en volume d'une peinture
[PDF] otto dix autoportrait 1913
[PDF] quand utiliser le gérondif en anglais
[PDF] participe présent adjectif verbal exercices imprimer
[PDF] sélection adverse définition
[PDF] l'adjectif verbal et le participe présent cours pdf
[PDF] antisélection assurance
[PDF] otto dix les mutilés de guerre
[PDF] le participe présent pdf
[PDF] aléa moral définition
[PDF] epi otto dix
[PDF] participe présent et adjectif verbal exercices cm2
[PDF] aléa moral asymétrie d'information
Guide des Peintures Industrielles
Industrial Coatings Guide
Guide des Peintures Industrielles
Industrial Coatings Guide
Système Glycérophtalique / Alkyd System
Wash Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Peinture Antirouille PGL
6 Colozinc Synthétique - Primaire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Interdus - Intermadiaire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Métalac . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Color Auto
. . . . . . . . . .10Système Cellulosique / Nitro Cellulose System
Colozinc Cellulosique Primaire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 . . . . . . . . . . . .13Industar
. . . . . . . . . . . . .14Système Au Four / Stoving Enamels System
Apprêt Au Four AF59
.16 Fourlac. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Fourlac Electrostatique . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Mastic pour Métal
/ Putty for metal Colomastic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Colofer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 . . . . . . . . . . . .22 Enduipox. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23Système Epoxypolyamide / Epoxy System
Colozinc Epoxy 80
. . .25 Colozinc Epoxy 40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Colozinc Epoxy PH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Iron Epoxy HS Intermédiaire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Epoxy Polyamide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29Système Epoxyvinyl/Polyuréthane/ Acrylique
/ Epoxy VinylSystem / P.U / Acrylic
Iron Epoxy Primaire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Iron Epoxy Intermédiaire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Iron Epoxy Finition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Colothane. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Colothane Antico. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 Colotex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36Système polyuréthane
/ Polyurethane System Colothane. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 Colothane Antico . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39Système de revêtements pour sol
/ Floor Coating SystemVernis Betonix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . .41 . . . . . . . . . . . . . . . . . . . . . . . .42 . . . . . . . . . . . . . . . . . . . . . . . . . . .43Epoxydur
. . . . . . . . . . .44Epoxydur +
. . . . . . . . .45Coloroute
. . . . . . . . . .46Système Caoutchouc Chloré
/ Chlorinated Rubber System Colozinc CC 80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 Colozinc CC PH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 Coloclor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50Système Haute Température
/ High Temperature System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52Aluminium HT 250 °C
53Aluminium THT 600°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Système Produits Spéciaux
/ Special Coatings System Colofood. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56Resipox
. . . . . . . . . . . . .57 Hydropox Métal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 Colopox Phénolique. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59Colopox Tolérant
. . . . .60 Colomarine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 Colopiscine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62Coloclean
. . . . . . . . . . .63Coloclean PU
. . . . . . . .64 Colothane Bois. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 . . . . . . . . . .66Système Vernis / Varnish System
Porex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68 Colopore. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69Vernis V5
. . . . . . . . . . . .70Vernis V7
. . . . . . . . . . . .71 Vernis V804. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72 Vernis Marin V9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 Vernis Cellulosique V4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74Vernis Synthétique mat V10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75Vernis Pu Mat - Satine - Brillant V11
. . . . . . . . . . . . . . . . . . . . . . . . .76 Vernis Acrylor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 Vernis Four VF16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78 Vernis Epoxy VE16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79Peintures Industrielles
Industrial Coatings
Système Glycérophtalique
Alkyd System
5Caractéristiques techniques :
Aspect en pot
: Liquide jaune verdâtre MatJaune verdâtre
18 ± 2%
19 ± 2%
0,85 ± 0,05
15 - 20 m²/L/10µm
(90/10) V0,9L/0,1L - 4,5L/0,5L
Prêt à l"emploi
1 an est une impression phosphatante passivante que couche d"accrochage pour la protection des métaux notamment l"aluminium et l"acier galvanisé. WASH PRIMER s"emploie aussi par les carrossiers pour avoir une excellente adhérence et résistance à la corrosion.NM 03,3,009 - Famille 1 - classe 7a1
preparing and protecting metals including aluminium and galvanised steel. Wash Primer is also used for automotive coatings and it has an excellent adhesion and corrosion resistance. NM 03,3,009 - Famille 1 - classe 7a1Technical Characteristics :Aspect : Greeny yellow liquid
MattGreeny yellow
18 ± 2%
19 ± 2%
0.85 ± 0.05
15 - 20 m²/L/10µm
(90/10) V0.9L/0.1L - 4.5L/0.5L
Ready to use
1 year
6Caractéristiques techniques :
Aspect en pot
MatBrun rouge - Gris - Blanc
85 ± 2%
64 ± 2%
1,85 ± 0,05
8,6m²/kg/40µm - 16m²/L/40µm
Mono Composant
1 kg - 5 kg - 25 kg
D66 (5 à 15%)
1 an fer et de résine glycerophtalique conçue spécialement pour la protection des ouvrages métalliques intérieurs ou agressives.NM 03,3,009 - Famille 1 - classe 4a
Is an anticorrosion primer designed
metallic structures exposed to moderately aggressive resin. NM 03,3,009 - Famille 1 - classe 4aTechnical Characteristics :Aspect
Liquid paint
Matt85 ± 2%
64 ± 2%
1.85 ± 0.05
8.6 sqm/Kg/40µm - 16 sqm/L/40µm
Mono component
1 kg - 5 kg - 25 kg
D66 ( 5 to 15%)
1 year
7Caractéristiques techniques :
Aspect en pot
MatVerdâtre
70 ± 2%
53 ± 2%
1,4 ± 0,05
13m²/L/40µm - 9,5m²/kg/40µm
Mono Composant
1 kg - 4 Kg - 25 kg
D77 - D33 - C3 (5 à 15%)
1 anPrimaire anticorrosif qui assure par son
métaux zingués, des alliages et des structures des métaux ferreux ou non ferreux. Colozinc Synthétique est conçu spécialement pour la protection des ouvrages métalliques industrielles. Colozinc Synthétique peut aussi être utilisé comme couche d"isolation sur d"anciennes peintures.NM 03,3,009 - Famille 1 - classe 4a
or non-ferrous metal structures. Synthetic colozinc and exterior metal structures exposed to industrial insulation layer over old paint systems. NM 03,3,009 - Famille 1 - classe 4aTechnical Characteristics :Aspect
Liquid paint
Matt Green70 ± 2%
53 ± 2%
1.4 ± 0.05
13 sqm/L/40µm - 9.5 sqm/kg/40µm
Mono component
1 kg - 4 Kg - 25 kg
D77 - D33 - C3 (5 to 15%)
1 year
8Caractéristiques techniques :
Aspect en pot
Satiné
Gris - RAL 7047
70 ± 2%
43,5 ± 2%
1,45 ± 0,05
6 m²/kg / 50 µm - 8,7 m²/L / 50 µm
Mono Composant
5kg - 25kg
D66 - D33 - C3 (5 à 15%)
1 an du primaire Colozinc qu"elle recouvre. Excellent pouvoir couvrant en surface et en opacité. Spécialement formulé Metalac, Colothane ou Finition Iron Epoxy. Conçu pourNM 03,3,009 - Famille 1 - classe 4a
systems. Formulated with alkyd resin; reinforces and that it covers. Excellent coverage and opacity. Specially Metalac, Colothane or Epoxy Iron topcoats. Designed for metal structures exposed to low to moderately aggressive industrial environments. NM 03,3,009 - Famille 1 - classe 4aTechnical Characteristics :Aspect : Liquid paint
Satin Grey70 ± 2%
43.5 ± 2%
1.45 ± 0.05
6 sqm/Kg / 50 µm - 8.7 sqm/L / 50 µm
Mono component
5kg -25kg
D66 - D33 - C3 ( 5 to 15%)
1 year
9Caractéristiques techniques :
Aspect en pot
Satiné
Gris - RAL 7047
70 ± 2%
43,5 ± 2%
1,45 ± 0,05
6 m²/kg / 50 µm - 8,7 m²/L / 50 µm
Mono Composant
5kg - 25kg
D66 - D33 - C3 (5 à 15%)
1 anNM 03,3,009 - Famille 1 - classe 4a
very fast drying. Metalac is intended for the protection of industrial installations exposed in low to moderately aggressive atmospheres, protection of structures, pylons, trucks, agricultural machinery. NM 03,3,009 - Famille 1 - classe 4aTechnical Characteristics :Aspect
Liquid paint
Glossy
A choice
67 ± 2%
56 ± 2%
1.16 ± 0.05
12 sqm/Kg / 40 µm - 14 sqm/L / 50 µm
Mono component
1kg -5kg -15kg -20kg
D33 - D55 - D66
1 year
Caractéristiques techniques :
Aspect en pot
Brillant
Au choix
67 ± 2%
56 ± 2%
1,16 ± 0,05
12m²/kg / 40 µm - 14m²/L / 40 µm
Mono Composant
1Kg - 5kg - 15kg - 20kg
D33 - D55 - D66
1 an 10 caractérisée par sa dureté, élasticité et haute résistance aux intempéries.Technical Characteristics :
Aspect
Fluid paint
Glossy
and grey 66%50%
1,13±0,05
11m2/L/45μm
Drying at 20°C/60%R.H
85 gr - 250 gr - 1 kg
2 years
Caractéristiques techniques :
Aspect en pot
Brillant
66%50%
1,13±0,05
11m2/L/45μm
Sechage à 20°C et 60% d'hygrometrie
85 gr - 250 gr - 1 kg
2ansCaractéristiques techniques :
Aspect en pot
Brillant
66%50%