[PDF] accu chek guide error codes

A meter or test strip error has occurred. Repeat the blood glucose test. If a second E-3 code appears, perform a control test with the control solution.Questions associées
View PDF Document


  • What is the e2 code on Accu-Chek guide?

    E – 2 Incorrect code chip Turn off the meter and insert the correct chip. E – 3 Test error Discard the test strip and repeat the test. control) Discard the test strip and repeat the test. to insert the new code chip before using them for testing.
  • What is error code E3 on Accu-Chek guide?

    This error could appear if the cap on the test strip container was not closed tightly. The test strips may have been damaged due to improper storage or handling. In rare cases, an E-3 error code may indicate that your blood glucose is extremely high and above the system's measuring range.
  • What is error code E4 on Accu-Chek guide?

    When the meter display screen shows an error message “Er4”, it could mean there is not enough blood sample on the test strip to perform a test. Repeat the blood glucose test. Take out a new test strip and insert it into the meter's test strip port.
  • Accu-Chek Guide and Accu-Chek Performa blood glucose meters

    1Display E-9 Errors (indicating that the batteries need to be replaced)2Unexpectedly display the low battery icon.3Have short battery life.4Not power on.
View PDF Document




Error Messages Error Messages

Manual. This error could appear if the cap on the test strip container was not ACCU-CHEK ACCU-CHEK INSTANT and. SAFE-T-PRO are trademarks of Roche. ©2019 ...



Troubleshooting ACCU-CHEK Performa Troubleshooting ACCU-CHEK Performa

Point of Care Testing (POCT) - ACCU-CHEK® Performa Quick Reference Guide To provide solutions to common ACCU-CHEK® Performa error messages that might appear ...



ACCU-CHEK® Inform II Operators Manual ACCU-CHEK® Inform II Operators Manual

Error messages that appear on-screen include information or instructions on how to correct the error. For all questions about the ACCU-CHEK Inform II system.



09241493001 MANUAL AC GUIDE ME FOR AU EN

If the E-7 or E-9 error code still appears on the display after you have changed ACCU-CHEK ACCU-CHEK GUIDE



Users Manual

9 mar 2016 The Accu-Chek Guide test strips with the Accu-Chek Guide meter are intended for in vitro diagnostic self-testing by people with diabetes. The ...



OM - Accu-Chek Inform II Operators Manual version 7.1

30 lis 2020 On the packaging on the identification plate of the meter



CoaguChek XS Plus System Operators Manual

If the code chip is missing or incorrectly inserted error messages appear in the display (refer to the Troubleshooting section of this manual). 2 Check that 



Users Manual

the Accu-Chek Active test strips that belong to the code chip ! Accu-Chek Symbols problems and error messages. Error messages. When an error occurs



Instrukcja obsługi

8 kwi 2020 Testy paskowe Accu-Chek Instant wraz z glukometrem Accu-Chek Instant przeznaczone są do stosowania w celu ilościowego pomiaru stężenia glukozy w.



Users Manual

21 mar 2019 ... error messages (E-1 through E 14). ... These symbols may appear on the packaging on the type plate



Error Messages

Press the Accu-Chek Safe T-Pro. Plus lancing device firmly against the puncture site*. Push and release button down.^. The test result appears on the display 



Troubleshooting ACCU-CHEK Performa

Point of Care Testing (POCT) - ACCU-CHEK® Performa Quick Reference Guide Common error messages ... code exp. Test strip expires end of current month.



E-1 E-3 E-4 E-6 E-7 E-8 E-9 E-1

Es posible que su nivel de glucemia sea extremadamente alto o que haya ocurrido un error en el medidor o en la tira reactiva. Si su resultado de medición 



09241493001 MANUAL AC GUIDE ME FOR AU EN

The Accu-Chek Guide test strips with the. Accu-Chek Guide Me meter are intended to quantitatively measure glucose in fresh capillary whole blood from the finger 



ACCU-CHEK® Inform II Operators Manual

Error messages that appear on-screen include information or instructions on how to correct the error. For all questions about the ACCU-CHEK Inform II system.



Users Manual

There is no code chip in the meter. Insert the code chip that belongs to the. Accu-Chek Active test strips you are currently using. Averages cannot be 



81401_MANUAL AC GUIDE ME SC US EN

Remove and reinsert the test strip or repeat the blood glucose or control test with a new test strip. If the error persists contact the Accu?Chek. Customer 



EMR Integration Guide

eHF error code. 2.16.840.1.113883.3.37.9.9.1.9/VAL-. 001001. Patient Identification. Patient ID – Overview. An EMR can access data from Accu-Chek Connect 



Consumer Letter (Accu-Chek Insight E-7) Urgent field safety notice

This error message could not be resolved by a battery change and a pump self-test as advised as the first step in the manual. In such an instant the alarm 



OM - Accu-Chek Inform II Operators Manual version 7.1

30 nov 2020 On the packaging on the identification plate of the meter