What is Neuber's rule?
Neuber's rule states that for a notched member subjected to a nominal stress, S, the notch root will deform until the product of the local stress ? and strain ? is as given by the following equation: where Kf is the fatigue notch factor. Equation (7) is shown by the dashed line in Figure 11.
What is the Neuber [1-3] plasticity correction?
translation, the one most popularly adopted by most software methods is the Neuber [1-3] plasticity correction. Fig. 1 :Correcting an Elastic Stress Calculation for Material Plasticity As depicted in Fig._1, the Neuber correction can be set into three steps: Using elastic calculation methods compute the stress and strain
What is notch strain analysis using Neuber's rule?
where E is Young's modulus, K ? and n ? are material constants. A simplified model such as Neuber's rule ( Neuber, 1961) or a numerical analysis such as finite element analysis, is used for the notch strain analysis. Here, the simplified model using Neuber's rule is briefly stated.
Does Neuber's rule underestimate ductile cohesive failure?
It is clear that under a given applied load, the Neuber’s rule underestimates the peak adhesive shear strain for moderately high strain ( ). When the Neuber’s solution is accurate, the necessary scarf angle ?d to avoid ductile cohesive failure () is Figure 4.20.